Inserting A Memory Stick - Sony PCG-K215B Hardware Manual

Write-protecting a Memory Stick
Some Memory Sticks are designed with an erasure prevention switch to protect valuable data from accidental erasure or
overwriting.
Move the tab horizontally or vertically* to set or release write-protection. When the erasure prevention switch is off, data can be
saved on the Memory Stick. When the erasure prevention switch is on, data can be read from but not saved on the Memory Stick.
LOCK
LOCK
* Some kinds of Memory Stick do not have a lock switch.

Inserting a Memory Stick

There are 2 ways you can insert a Memory Stick in your computer:
❑
Using the Memory Stick slot;
❑
Using a PC Card slot. To do this, you need an optional PC Card adapter.
You can only insert one Memory Stick at a time.
To insert a Memory Stick using the Memory Stick slot, proceed as follows:
1
Once you have stored your data from your digital device, insert the Memory Stick with the arrow facing up and toward the
Memory Stick slot.
2
Carefully slide the Memory Stick into the slot until it clicks in place.
The Memory Stick is automatically detected by your system and appears in your My Computer window as a local drive, under
the appropriate letter (depending on the configuration of your computer).
LOCK
n N
32
Using your VAIO computer