Emulated Controls - Wave Idea Bitstream 3X Instructions Manual

AN003 : Bitstream 3X – Mackie/Logic control emulation
is similar to the Mackie/Logic control, 2 digits 7 segments are displayed on the Bitstream 3X LCD
Pn
LCD display
Not implemented in the current firmware version
Channels metering
The Bitstream 3X displays all 8 channels metering information. These information represent the peak level
information sent by the host.
The Bitstream 3X decrease these peak levels information with a decay time of 300ms, as mentioned in the
Mackie/Logic control specification.
Master fader level
The Bitstream 3X displays the master fader level. It is not a part of the Mackie/Logic control specification but
very useful. This information is displayed on the bottom right of the Bitstream 3X LCD.
Leds information
Not implemented in the current firmware version
V-pots led rings
Not implemented in the current firmware version

Emulated controls

The Bitstream 3X emulates the Mackie/Logic control controls as follow:
V-pots
Not implemented in the current firmware version
Channel faders 1-8
The Bitstream 3X faders 1-8 emulate these controls. This emulation is available on the 21 groups of the
Bitstream 3X.
Master fader 9
The Bitstream 3X crossfader emulates this control. This emulation is available on the 21 groups of the
Bitstream 3X.
Please note the crossfader generates a single MIDI event while the Bitstream 3X is in Mackie/Logic mode.
www.waveidea.com
5
Rev 1.5 - Page