Connecting peripheral devices
To connect a TV to the port replicator, proceed as follows:
1
Attach the port replicator to your notebook.
2
Plug one end of the audio/video cable (1) (optional) into the
right and left line-out and the Video out connector (2) and
the other end into the Audio Left and Audio Right
connectors and the Video connector on your TV.
3
Plug one end of the S-video cable (3) (optional) into the S-
Video out connector (4) and the other end into the S-video
connector on your TV.
4
Switch the input channel of the TV to external input.
5
Set up the TV configuration system.
n N
76