Table of Contents
Advertisement
Using Video software
Combining still images with video images
To combine still images with video images, proceed as follows:
1
Launch DVgate Assemble.
2
Select the still image you want to insert from the Assemble List.
3
Choose Edit a clip... from the Edit menu in the main window.
The DVgate Assemble - Clip dialog box appears.
4
Enter the insertion time in seconds or frames.
5
Turn the Wide TV mode on or off.
6
Select the screen size.
7
Adjust the height and width of still images when they are output:
Full size: Enlarges the screen size to the full monitor size. The aspect ratio may change with this
selection.
Original Size: Retains the original size of the image, without reduction or enlargement.
Full size using aspect ratio as saved: Enlarges the screen size to the maximum without changing
the aspect ratio.
8
Click OK.
The still and video images are combined.
n N
31
Advertisement
Table of Contents
