Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HRS M3X2
Summary of Contents for HRS M3X2
- Page 1 M3X2 ISOLATION BASE A Low Noise Floor Is Fundamental...
- Page 2 100% to verify the assembly fits are up to our exacting standards. This rigorous protocol, combined with precision design, results in a product that is a pleasure to install, use, change, or expand at anytime. From all of us here at HRS, we truly hope you enjoy our product.
-
Page 3: Safety Instructions
Safety Instructions IMPORTANT WARNINGS! Do not place any tall objects on the isolation base. A tall object is any object with a height that is greater than the depth of the isolation base. A tall object is also any object that has a height greater than its own width or length. Tall objects must not be placed on top of the isolation base for any reason. -
Page 4: Setup Instructions
Use a protective barrier between sharp objects and the base surface if you desire. The M3X2 Isolation Base is very effective at reducing vibration and does not require the use of cones and other sharp objects. - Page 5 The HRS G7 feet (pictured below) will not have any compliance and so they should not react when you press down on the corner of the base. Instead, check that all four feet are in direct intimate contact with the surface the isolation base is resting on by pressing down firmly at each corner and observing if the isolation base rocks up and down.
- Page 6 HRS Isolation Bases built for a specific component model have already been set up for that specific component weight distribution. If the component is centered on the custom isolation base and the HRS logo is in the right front corner then the loading of a custom base model is correct.
-
Page 7: Specifications
Specifications The following specifications are based on your M3X2 Isolation Base part number which is marked on the outside of the original factory box. The part number is composed of the following information sequence: Series - Model Number – Foot Type (Load Range) - Base Color The load range can also be identified by the color of the sticker located on the back of the isolation base frame. - Page 8 Blue (BL) 81 - 155 lb (36.5 – 70.5 kg) Purple (PR) Not load-dependent (G7 feet) The M3X2 is available in custom sizes and load ranges to accommodate every audio component in the world. Contact HRS for details about custom products.
- Page 9 Blue (BL) 71 - 140 lb (31.9 – 63.6 kg) Purple (PR) Not load-dependent (G7 feet) The M3X2 is available in custom sizes and load ranges to accommodate every audio component in the world. Contact HRS for details about custom products.
-
Page 10: Care And Maintenance
Care and Maintenance The M3X2 Isolation Base is a very low maintenance item that will provide many years of trouble free performance by applying these basic care instructions. The top of the M3X2 Isolation Base contains a natural granite surface. Clean the granite surface using a lint-free soft (non-abrasive) cloth. -
Page 11: Limited Warranty
Limited Warranty Harmonic Resolution Systems warrants the product designated herein to be free of manufacturing defects in material and workmanship subject to the conditions herein set forth, for a period of 90 days from the date of purchase by the original purchaser. If the purchaser registers the unit with Harmonic Resolution Systems by mailing in the warranty card, together with a copy of the bill of sale, within 14 days of the date of purchase, said purchaser would be registered for an extended service contract. - Page 12 Units to be repaired by Harmonic Resolution Systems must be sent shipping and insurance prepaid by the original purchaser in the original packaging material. A returned product should be accompanied by a written description of the defect. Repaired units will be returned by Harmonic Resolution Systems shipping and insurance prepaid by the customer.
- Page 13 (MADE IN USA) All Harmonic Resolution Systems Inc. products are 100% Made In The United States of America by skilled craftsmen using only the finest materials and our personal dedication to the highest workmanship standards. ARMONIC ESOLUTION YSTEMS 2495 Main Street, Suite 227 Buffalo, NY 14214 Telephone: 716-873-1437 Web: www.AVisolation.com...
Need help?
Do you have a question about the M3X2 and is the answer not in the manual?
Questions and answers