Table of Contents
Advertisement
Getting help
My software program locks up or crashes
Contact the software publisher or designated provider for technical support.
My touchpad interprets a single tap as a double-click
Open the Mouse icon in the Control Panel and change the button assignments in the Mouse Properties
dialog box. One of the buttons is assigned to the double-click action.
My mouse does not work
If you are using an external serial PS/2 mouse, check that the mouse is plugged into the mouse connector
of your optional port replicator.
If you are using an optional Sony USB mouse, check that the appropriate driver and software are
properly installed.
Check that the USB mouse is plugged into the USB connector.
About the display
My LCD does not display anything
Check that the computer and display are both plugged into a power source and that they are turned on.
Check that the power indicator on the front panel of the computer is on.
Check that the battery packs are inserted properly and that they are charged.
Adjust the brightness of the LCD.
The computer may be in LCD (video) standby mode. Press any key to activate the display.
The display mode may be set to external display mode. Press and hold the <Fn> key while pressing <F7>
several times.
n N
90
Advertisement
Table of Contents
