Checking The Driver's Installation - Sony PCG-GRX315MP Software Manual

Hide thumbs Also See for PCG-GRX315MP:
Table of Contents

Advertisement

Managing drivers
8
Click Finish.
You may be asked to restart your machine.
9
Click Yes.
The driver is installed.

To install your device driver, you must be logged on to your computer with an administrator account.

Checking the driver's installation

When the computer restarts, verify that the device is working properly.
To verify the driver's installation, proceed as follows:
1
From the Start menu, click Control Panel.
The Control Panel window appears.
2
Double-click the System icon.
The System dialog box appears.
If you do not see the System icon, click Switch to Classic View on the left side.
3
Click the Hardware tab, then click Device Manager.
4
Double-click the option corresponding to the device you installed, then double-click your device.
The Properties dialog box appears.
5
Make sure that the This device is working properly message is displayed under Device status.
6
Click OK.
Close all the opened windows, your device is ready for use.
The device is not working properly in the following cases:
Your device is shown in Device Manager with a yellow question or exclamation mark.

Right-click your device and click Uninstall. Then repeat from step 2 in Installing a driver
n N
93
(page
92).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vaio pcg-grx316mpVaio pcg-grx316spVaio pcg-grx series

Table of Contents