Table of Contents
Advertisement
Using Click To DVD*
4
Click Capture.
Click to DVD begins capturing the video and displays the first image in each clip in the clip tray. Each clip
becomes an individual chapter on the DVD. Capturing ends when a blank segment of tape (that is, a
segment of tape on which nothing is recorded) is reached.
✍
Any unwanted clips can be deleted before the DVD is created.
For details on how to connect the device to the computer, refer to the user manuals that were provided with the device and to your computer's
Hardware Guide.
Recording videos manually (manual control)
To record videos with manual control, proceed as follows:
1
Connect an i.LINK™ cable (not supplied) between the digital video device and the computer, and then
set the device to VCR/VTR or CAMERA mode.
2
Click Capture Video in the step guide.
The Capture Video screen appears.
3
Select Manual Control in the Capture Selection box.
Use the on-screen digital video device control button to fast forward or rewind the tape to the segment
of video you want to capture. Make sure that an image from the start of the segment appears in the
preview monitor.
4
Click Capture.
Click to DVD begins capturing the video and displays the first image in each clip in the clip tray. Each clip
becomes an individual chapter on the DVD.
5
When the video reaches the end of the segment you want to capture, click Stop.
The video capturing stops.
Clicking Stop does not stop tape playback on the digital video device.
6
Repeat the capture procedure for all the video segments for your DVD.
✍
For details on how to connect the device to the computer, refer to the user manuals that were provided with the device and to your computer's
Hardware Guide.
n N
60
Advertisement
Table of Contents
