Sony VAIO PCG-GRV516G Software Manual page 31

Using Video software
The Begin point image and the time code appear in the lower part of the dialog box.
Click the End button when you see the scene to be used as the End point.
The End point image and the time code appear in the lower part of the dialog box.
5 Click OK.
The AVI file is edited.
Combining still images with video images
To combine still images with video images, proceed as follows:
1 Launch DVgate Assemble.
2 Click the Add button.
The Add dialog box appears.
3 Select the image file type from the Files of type drop-down list.
4 Select your image file and click Open.
The image is added to the Assemble List.
5 Choose Edit a clip... from the Edit menu in the main window.
The DVgate Assemble - Clip dialog box appears.
6 Enter the insertion time in seconds or frames.
7 Turn the Wide TV mode on or off.
8 Select the screen size.
9 Adjust the height and width of still images when they are output:
❑
Full size: Enlarges the screen size to the full monitor size. The aspect ratio may change with this
selection.
❑
Original Size: Retains the original size of the image, without reduction or enlargement.
❑
Full size using aspect ratio as saved: Enlarges the screen size to the maximum without changing
the aspect ratio.
n N
30