Advertisement
Available languages
Available languages
Manual No : M0067 Issue No : 1 Date : 2016-08-01
MANUAL No : 0067
1
Install the batteries
1)
Slide the battery cover off on right hands side.
2)
Insert in 4 quality AA batteries into the keypad and reinstall battery
cover.
2
How to open the safe the first time (Factory set code: 4560)
1)
PRESS * button
(C0dE
2)
PRESS in the FACTORY SET CODE ( ex:4560)
3)
PRESS #
(0PEn
on screen)
* 4560 #
3
To change the MASTER CODE
4)
PRESS the button (black or red) located on the inside door panel
(EnTERCd
on screen)
5)
ENTER ny personal code 4-8 digits long
6)
PRESS the # button
(SUCCESS
"M > NEW PERSONAL CODE > #"
*Just a moment*
Pleas kindly try the new personal code once again with the
door OPEN before closing the door.
4
How to set and change additional user codes
NOTE: You must know the master code to set additional user codes
1)
PRESS the * button
2)
PRESS the # button
MASTER CODE
3)
PRESS in the
4)
PRESS the #
(0-ChAngE
5)
PRESS the number 1 button
6)
PRESS the user number you want to set or change user number
5
are your options
(EnTERCd
NEW PASSWORD
7)
PRESS in the
8)
PRESS the # button
(RECOdE
9)
PRESS in the
NEW PASSWORD AGAIN
10)
PRESS the # button
(SUCCESS
* > # > MASTER CODE > # > 1 > PRESS THE NUMBER TO SET OR
CHANGE > NEW PASSWORD > # > NEW PASSWORD AGAIN > #
5
To delete a user kod
1)
PRESS the * button
(COdE
2)
PRESS the # button
(EnTERCd
MASTER CODE
3)
PRESS in the
4)
PESS the # button
(0-ChAngE
5)
PRESS the number 2 button
Document Safe
DS-500E, DS-500E/F
on screen)
on screen)
on screen)
(Cn-1
on screen)
on screen)
(must be 4-8 digits)
on screen)
on screen)
on screen)
on screen)
on screen)
(dn-2345
on screen)
Int phn.+46 371-52 32 90 / www.profsafe.se
6)
PRESS the user number you want to delete 2-5
7)
PRESS the number 1 button to confirm you want to delete
(SUCCESS
NOTE: If you change your mind and decide you do not want to delete, you can
press the number
* > # > MASTER CODE > # > 2 > PRESS the number button to
delete >
6
1)
PRESS the * butoon
2)
PRESS the # button
3)
PRESS IN
4)
PRESS the # button
5)
PRESS the number 7 button
NOTE :
1) After pressing the number 7 button, all password will show as**** on
screen.
2) To change it back, repeat the ame steps.
* > # > MASTER CODE > # > 7
7
The time for changing battery
1)
The numbers on the screen may not be clear !
2)
Door may not open in spite of exact code being entered !
8
Lock out mode
If you put in the wrong code 3 times, teh safe will go into
(H0ld
on screen).
2 thru
If this happens, leave the batteries in wait 3 minutes or until the locks stops
beeping and then you can attempt to open again.
9
Emergency opening code
Can be acquired, but the serial number of the cabinet & battery number (located on
the left side of the battery case, see picture) are required.
DS-1000E, DS-1200E, DS1700E, DS1750E
on screen)
0
button instead of the number 1 will cancel.
1 > = delete OR 0 = cancel
How to change display mode
(C0dE
on screen)
(EnTERCd
on screen)
MASTE CODE
(dSP HIdE
on screen)
LOCK OUT
(1-y-0-n
on screen)
MODE.
2 av/of 2
Advertisement
