Advertisement
Figure 11
Figure 13
Figure 15
Figure 17
Figure 19
For detailed specifications,
product tutorial videos
Figure 12
Figure 14
Figure 16
Figure 18
Figure 20
and more, please visit www.photoflex.com
11. The free rib can now line up directly next to an adjacent rib.
12. Gently pull the end-cap while inserting the free rib into the empty
receptacle hole. Do not cross ribs to insert into end-cap.
13. The loose umbrella material from the corner where each rib was
moved can be folded back and secured with the Velcro fasteners
sewn into the material.
14. Fold the material back and press fasteners together.
15. The umbrella flap looks like this when fastened back.
16. The umbrella can be configured with any number of sides from
eight corners down to four corners.
Folding the Umbrella
Figures 17 – 20
17. Remove the umbrella from the MultiClamp or light. Hold the lower
end of the post with one hand.
18. With the other hand, push the metal locking tab into the post until
the metal collar is free.
19. Slide the metal collar down the post until the umbrella is closed.
20. Wrap the Velcro strap around the material and secure.
Customer Support (831) 786-1370
E-mail: sales@photoflex.com
Photoflex is a division of PromarkBRANDS, Bartlett, IL USA.
©2016 ALL RIGHTS RESERVED. Photoflex
registered trademarks of Photoflex and/or its affiliates in the U.S. and other countries.
PHOTOFLEX
WARRANTY
®
• Warranties only cover manufacturer's defects and workmanship.
• We reserve the right to inspect all merchandise returned (end
users and dealers) for warranty fulfillment.
• All returns must be pre-approved with Return Manufacturers
Authorization obtained from Photoflex/PromarkBRANDS.
• A receipt showing date of purchase will be required for all returns.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
and the Photoflex logo are trademarks or
®
Rev 09/2016
Advertisement
