Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for DANIU RTU5024
- Page 1 GSM Gate, Barrier, Shutter, Garage Door and Door opener Open gate or garage door with a FREE call from your mobile phone! Remote switching machines with a FREE call from your mobile phone! GSM Gate Opener GSM Remote Switch...
- Page 2 RTU5024 User Manual Ver 2.0 Date Issued: 2019-03-15...
-
Page 3: Table Of Contents
Maintenance -------------------------------------------------------------------------------- 10 10. Warranty ----------------------- -------------------- --------------- ----- 11 This handbook has been designed as a guide to the installation and operation of RTU5024 GSM Gate Opener. Statements contained in the handbook are general guidelines only and in no way are designed to supersede the instructions contained with other products. -
Page 4: Brief Introduction
1. Brief introduction The GSM Gate Opener RTU5024 is a very simple device which can be used for authorized door access, controlling gates, switching of remote equipments, car parking systems. Actually the GSM Gate Opener RTU5024 can be used in places which require turning ON/OFF your system, machines, equipments remotely with a FREE call from your mobile phone and protect your assets. -
Page 5: Standard Packing List
Use Qualified Maintenance Service Maintenance can be carried out only by qualified maintainer. 3. Standard Packing List Control Unit X1, GSM ANT X1, User Manual X1. 4. Physical Layout 4.1 Control Unit physical layout Interface Instruction INDICATORS Flash per 1 second(quickly):registering to cellular network. -
Page 6: Features
Notice :Beside the SIMCard ,There is a RUN led, when the RTU5024 has registered to cellular network, The RUN led will flash per second; if The RUN led is off, it indicates that the RTU 5024 can not connect to SIM card or unregistered to the cellular network 5. - Page 7 Please write down the Authorized number list in a paper for review in further. 10. If you want to reset the RTU5024 to factory default, then please send pwd#RESET# （The unit will reply to Reset Success! Please Reboot your Device ) or When the RTU5024 works normally, you can always press the RESET key beside the SIMCard for several seconds until the RUN Led always is ON.
- Page 8 005: Empty Tips: 1. the authorized number means the one who can dial the RTU5024 unit to open it. 2.We strongly recommend that the serial number of 01 is cellphone number, because of the Relay action message only send to the first position number;...
- Page 9 6.6 Setup only authorized number can access it (Default) pwd#AU# Tips: With the above command you allow only people that are in the authorized number list can access the RTU5024. This is the standard and recommended option. Inquiry this setting: pwd#AC?# Reply:...
-
Page 10: Installation
6.8 Check GSM signal quality pwd# CSQ? Check GSM signal quality. This command is useful to see the GSM network signal level of your GSM Gate Opener is receiving. After you send the command, you can receive a SMS with signal quality in range 0 to 31 (if it is 0 we doubt it will ever answer). -
Page 11: Technical Specifications
7.2 Install the Mainframe The mainframe should be installed in the position that person can not get it, and there with a power source as well as enough GSM signal coverage. 8. Technical specifications Rated Voltage: 12VDC 1 A Working temperature: -10℃～+60℃... -
Page 12: Important Information
Storage temperature: -20℃～+60℃ Relative humidity: 10-90%, No condensation Work frequency: 900/1800MHz Communication protocol: GSM PHASE 2/2+ (include data service) Related Voltage of the Output Relay: 3A/240V AC Net Weight: 0.30Kg 9. Important information Please read the User Manual carefully before you install the Control Unit and set the Control Unit. - Page 13 The End! Any questions please help to contact us feel free. Made by Daniu-IoT Email:mata@daniu-iot.com - 11 -...