Self-Diagnostic Function - Toshiba 37C3000P Service Manual

Every pressing of
screen as described below in Service Mode.
Picture
Self Diagnostic Function
1. Press "9" button on remote control during display of adjustment menu in the service
mode. The diagnosis will begin to check if interface among IC's is executed properly.
2. During diagnosis, the following displays are shown.
* Self check display and Item are subject to the models.
file://D:\Documents and Settings\Admin\Рабочий стол\37C3000P Ver. 1.02\html\!adj...
button on the remote control changes the built-in test patterns on
Signal
Red raster
Green raster
Blue raster
All Black
All White
Стр. 12 из 21
05.05.2015