Table of Contents
Advertisement
FUNCTION AND OPERATION
Manual Tune
The television can be tuned-in manually using Manual tuning. For example: if the television
cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station
on another System.
Use
and
to move across the screen and select any of these Manual Tune options.
Programme
: The number to be pressed on the remote control.
System
: Specific to certain areas.
Colour system
: Factory set to Auto, should only be changed if problems are
experienced, i.e. NTSC input from external source.
Programme skip
:
the channel is ON.
Channel
: The channel number on which a station is being broadcast.
Search
: Search up and down for a signal.
Manual fine tuning : Only used if interference/weak signal is experienced.
: Station identification. Use the
Station
enter up to seven characters.
To allocate a programme position on the television for a decoder and media recorder: turn the
decoder on, insert a pre-recorded film in the media recorder and press PLAY, then manually
tune.
means nothing has been stored or the facility to skip
or
and
or
buttons to
Advertisement
Table of Contents
