Toshiba 40WH08G Service Manual page 20

Item Name
HIT Vertical ampli- Picture mode 1
tude adjustment Super-live mode
(PAL SUB-
TITLE)
WID Vertical ampli- Picture mode 1
tude adjustment WIDE mode
PAL WIDE
NHIT Vertical ampli- Picture mode 1
NLIN tude adjustment WIDE mode
NTSC WIDE
NHIT Vertical ampli- Picture mode 1
tude adjustment SUPER-LIVE mode
SUPER-LIVE
NTSC
NHIT Vertical ampli- Picture mode 1
tude adjustment CINEMA mode
CINEMA
NTSC
NHIT Vertical ampli- Picture mode 1
tude adjustment SUB-TITLE mode
SUB-TITLE
NTSC
Completion of adjustment
Setting Input signal
Phillips pattern
(PAL-I)
Phillips pattern
(PAL-I)
Monosco signals
NTSC
LEADERE-435B
Monosco signals
NTSC
LEADER-435B
Monosco signals
NTSC
LEADER-435B
Monosco signals
NTSC
LEADER-435B
Measuring point
Screen adjustment (1)Turn the screen size to SUB-TITLE.
(2)Adjust the registers on the top and
bottom of the Phillips pattern as shown
in the next page.
(Note) Do not touch the centering magnet
Screen adjustment (1)Turn the screen size to WIDE.
(2)The left and right flags of the Phillips
pattern are to contact the screen edge.
(3)The user center position adjustment is to
be 0.
Screen adjustment (1)Turn the screen size to WIDE mode.
(2)The 1st line on the screen is to be
hidden by the mask.
Screen adjustment (1)Turn the screen size to SUPER-LIVE
mode.
(2)Adjust so that the upper side 3rd line on
the screen will contact the screen edge.
(3)Do not adjust the NVLI.
Screen adjustment (1)Turn the screen size to CINEMA mode.
(2)Adjust so that the character 30 on the
upper, lower, and left-and-right ends will
contact the screen edge.
Screen adjustment (1)Turn the screen size to SUB-TITLE
mode.
(2)Adjust so that the upper side 5th line of
the register on the screen will contact the
screen.
(3)The NVLI is not to be adjusted.
GENERAL ADJUSTMENTS
Adjusting method Adjustment standard