Advertisement

Quick Links

BULLDOG ADV
Use and maintenance manual
www.raimondiutensili.it

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BULLDOG ADV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RAIMONDI BULLDOG ADV

  • Page 1 BULLDOG ADV Use and maintenance manual www.raimondiutensili.it...
  • Page 2: Table Of Contents

    ExTENSION FOR THE SLIDING SURFACE __________________________________________________________________ 35/44-6 TUBULAR jUNCTION ___________________________________________________________________________________ 35/44-6 ChAPTEr 7 DIAGNOSTICS TROUBLE-SHOOTING __________________________________________________________________________________ 36/44-7 ChAPTEr 8 SPArE PArTS AND ELECTrIC DIAGrAM SPARE PARTS _________________________________________________________________________________________ 38/44-8 ELECTRIC DIAGRAMS __________________________________________________________________________________ 42/44-8 mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 2/44-0...
  • Page 3: Chapter 1 Introduction

    Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 1 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Introduction www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it DECLArATION OF CONFOrMITY (According to Council Directive 2006/42/EC Annex II.a) ThE MANUFACTUrEr Raimondi S.p.A. Company 41122 Via dei Tipografi, 11...
  • Page 4: Testing, Warranty And Responsibility

    Installation of purchased parts not complying with the specifications of RAIMONDI S.p.A., if purchased or not supplied by RAIMONDI S.p.A., if manufactured by it, as well as improper use of the machine, will make the warranty null and void. responsibility RAIMONDI S.p.A.
  • Page 5: Intervention Request And Technical Service

    Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 1 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Introduction www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 1.3 Intervention request - Technical Service Each intervention request to the Technical Service shall be sent, by fax, to: rAIMONDI S.p.A.
  • Page 6: Chapter 2 Safety Rules

    PrEVENTING ANY TYPE OF INJUrY TO PEOPLE AND/Or DAMAGING OF OBJECTS. 1. Do not try to start the machine until its operation has been fully understood. 2. In case of doubts, despite having carefully and entirely read this manual, please contact the RAIMONDI S.p.A. Technical Service.
  • Page 7: Definition Of Safety-Related Terms

    2.3 Correct use of the machine BULLDOG ADV profiling machine is suitable for profiling edges on single- and double-fired ceramic tiles, porcelain gres, marble, natural stone, Tuscan terracotta tiles, cement agglomerates.
  • Page 8 (mm) H 16 / 30 (inches) H 5/8” / 1 3/16” 90° POLISHING (mm) H 38 (inches) 1/2” ALL rESPONSIBILITY WILL BE DECLINED IF NON-OrIGINAL GrINDING WhEELS ArE USED. mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 8/44-2...
  • Page 9: Description Of Machine Groups

    1/4” 2.5 Description of machine groups The BULLDOG ADV series are made up of a series of groups. These interact to ensure functions are always effective. The groups are: 1 Motor group On which the grinding wheel is positioned. It is equipped with adjustment knobs and handles.
  • Page 10: Position Of The Operator

    & tools for the tile & stone professional Position of the operator The BULLDOG ADV series shall be used by one single operator, who will have to stand sideways the machine and, by grabbing the trolley handle, will be able to make half-bullnose shapings, bevels and “jolly”...
  • Page 11: Accessories Of The Machine

    Tel.: +39.059.280.888 - Fax: +39.059.282.808 Safety rules www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it Accessories of the machine The BULLDOG ADV series is supplied with the following accessories: 1. 30 mm (1 ) hexagon wrench; 3/16” 2. 8 mm (5/16”) socket head screw;...
  • Page 12: Vibrations

    For the comparison with exposure limit values and action values, the total weighted acceleration, obtained through the vector sum of the components, shall be standardized, namely analytically referred to a reference time of 8 hours. mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 12/44-2...
  • Page 13 In the overall assessment, non-continuous use caused by time fragmentation for material positioning and removal thereof once split up shall be taken into account. RAIMONDI S.p.A. believes BULLDOG ADV shall be included in the group of machines not exceeding the limit values provided for by the Directive 2004/44/EC.
  • Page 14: Demolition And Disposal

    DIrECTIVE 2002/96/EC (WEEE Directive) of the European Parliament and of the Council of 27 january 2003 on waste electrical and electronic equipment. With reference to the Directives in question, and in particular to the ANNExES “I A” and “I B” of the Directive 2002/96/CE, RAIMONDI S.p.A., declares that its product.
  • Page 15: Chapter 3 Handling, Installation, Adjustments

    Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 3 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Handling, installation, adjustments www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 3.1 Packing transport Transport shall be made using a fork lift truck, inserting the forks into the specific seats of the pallet. Use a lift truck having a suitable capacity (>200 Kg / 441 lbs).
  • Page 16: Power Supply

    3.3 Power supply The “BULLDOG ADV” profiling machine shall be supplied at the voltage corresponding to the value indicated on the “TECHNICAL DATA” plate, the machine shall be connected to a line only with an effective ground cable. In case of doubt, do not connect the machine.
  • Page 17: Assembly Of The Machine

    Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 3 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Handling, installation, adjustments www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 3.4 Assembly of the machine TO CArrY OUT ThIS OPErATION, WEAr ThE PrOTECTIVE GLOVES AND ACCIDENT-PrEVENTION ShOES. Remove the machine from the pallet and make sure there are no broken or damaged parts. MAKE SUrE ThE TOOLBOX hAS BEEN FIXED COrrECTLY.
  • Page 18: Tank Filling

    TO ALLOW FOr ThE PUMP COrrECT FUNCTIONING, WATEr ShALL BE KEPT CLEAN. EACh TIME ThE TANK WATEr IS ChANGED, CLEAN ThE FILTEr AND ThE PUMP IMPELLEr. POUr IN ENOUGh CLEAN WATEr TO COVEr ThE PUMP. mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 18/44-3...
  • Page 19: Chapter 4 Use Of The Commands

    Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 4 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Use of the commands www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 4.1 Adjusting the grinding wheel for half-round shaping TO CArrY OUT ThIS OPErATION, MAKE SUrE ThE MAChINE IS NOT CONNECTED TO ThE MAINS.
  • Page 20: Adjusting The 45° Grinding Wheel For Jolly Cuts/Bevelling

    Block the motor group by screwing the (B) and (C) handles. Reposition the spray guard (A). Perform a 4 / 5 cm (1 / 2”) cut and if necessary perfect the adjustment by using the knob (M). 1/2” mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 20/44-4...
  • Page 21: Blocking Of Material

    Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 4 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Use of the commands www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 4.3 Blocking of material TO CArrY OUT ThIS OPErATION, MAKE SUrE ThE MAChINE IS NOT CONNECTED TO ThE MAINS.
  • Page 22 Lock material by means of movable clamps (I); they can slide on the black square, thus loosening handles (L) and they can be adjusted according to material thickness by means of wing nuts (M). mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 22/44-4...
  • Page 23 Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 4 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Use of the commands www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it Adjust the two wheels (N) and carry on processing the material. Materials with a width ranging from 45 mm (1 ) to 70 mm (2 25/32”...
  • Page 24 (L) and they can be adjusted according to material thickness by means of wing nuts (M). Adjust the two wheels (N) and carry on processing the material. AN EXCESSIVE LOCKING DEVICE PrESSUrE MAY CAUSE ThE DEFOrMATION OF ThE TrOLLEY AND JEOPArDIZE ThE SLIDING MOVEMENT. mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 24/44-4...
  • Page 25: Comply With The Following Warnings For All Profiling Types

    Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 4 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Use of the commands www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 4.4 Comply with the following warnings for all profiling types BEFOrE PrOFILING, MAKE SUrE ThAT ThE GrINDING WhEEL IS ShArP, PLACED IN ThE COrrECT POSITION AND ThAT ThE MATErIAL hAS BEEN PrOPErLY BLOCKED.
  • Page 26: Half-Bullnose Shaping

    5) The grinding wheel operating cycle is the following: 400 grain, 800 grain, 1500 grain, 1800 grain, 3500 grain. ThE PASSAGE FrOM A GrAIN TO ANOThEr ShALL BE GrADUAL AND COMPLY WITh ThE rECOMMENDED PrOCEDUrE. mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 26/44-4...
  • Page 27: Performing Jolly Cuts (Mitering 45°) And Bevelling

    Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 4 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Use of the commands www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 4.6 Performing Jolly cuts (mitering 45°) and bevelling removal phase Suitable for Jolly cutting (mitering 45°) and bevelling 1) Adjust the position of the grinding wheel according to the quantity of material to remove.
  • Page 28 6) Use of the belt in fixed position can lead to uneven wear of the diamond rib and streaking on its surface. To prevent this inconvenience occurring, change the position of the belt (see paragraph “4.2 Adjusting the 45° grinding wheel for jolly cuts/ bevelling”). mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 28/44-4...
  • Page 29: Combination Of Different Machines

    Use of the commands www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 4.8 Combination of different machines The Bulldog ADV series was conceived to be modular and to combine different machines belonging to the same series or to the BiBulldog series. FOr ThIS OPErATION ThE JUNCTION ACCESSOrY IS NECESSARY (see chapter optional accessories).
  • Page 30: Chapter 5 Maintenance Interventions

    LAWS IN FOrCE IN ThE COUNTrY OF USE. FOr A COrrECT OPErATION OF ThE PUMP, WATEr ShALL BE KEPT CLEAN. UPON EACh TANK WATEr ChANGE, CLEAN ThE FILTEr AND ThE PUMP rOTOr. mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 30/44-5...
  • Page 31: Sliding Device Replacement

    Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 5 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Maintenance interventions www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 5.3 Sliding device replacement TO CArrY OUT ThIS OPErATION, WEAr ThE PrOTECTIVE GLOVES AND ACCIDENT-PrEVENTION ShOES. In case the sliding guides wear out, comply with the following: Unscrew all the (A) (A1) and (A2) screws.
  • Page 32: Replacing The Grinding Wheel

    (D) counter-clockwise. Remove the B8 hexagon wrench (E). Try turning the cutter by hand to make sure it has been correctly fitted. Refit the spray guard (A). mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 32/44-5...
  • Page 33: Sharpening The Grinding Wheel

    Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 5 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Maintenance interventions www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 5.4.1 Sharpening the grinding wheel TO CArrY OUT ThIS OPErATION, WEAr ThE PrOTECTIVE GLOVES AND ACCIDENT-PrEVENTION ShOES.
  • Page 34: Recycle Pump Replacement

    (B). Reconnect the cables and tighten with the previously removed screws. Make sure the seal gasket (C) is not damaged. Replace it if needed. mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 34/44-5...
  • Page 35: Chapter 6 Accessories

    Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 6 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Accessories www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it 6.1 OPTIONAL ACCESSOrIES 6.2 Extension for the sliding surface The 2 extensions for the sliding surface allow to have a firmer work bench at both infeed and outdeed improving the linearity on long sizes and favouring the material loading and unloading operations.
  • Page 36: Chapter 7 Diagnostics

    The grinding wheel does not cut Worn grinding wheel. Dress the diamond rim, see paragraph. “Grinding wheel sharpening” Unfit grinding wheel. Assemble suitable grinding wheel, see paragraph “Recommended grinding wheel”. mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 36/44-7...
  • Page 37: Chapter 8 Spare Parts And Electric Diagram

    Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 8 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Spare parts and electric diagram www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it Spare parts and electric diagram Use and Maintenance Manual Page 37/44-8...
  • Page 38: Spare Parts

    288L DIAMOND DRESSING STONE 305MR16C RETRACTABLE HANDLE 305PM35C KNOB 306IP03C HANDLE 311SI05A “H” LEG WITH WHEELS 19.1 379PIE03C ADjUSTABLE FOOT 19.2 315CB05C RUBBER WHEEL 311SI05A1 “H” LEG WITHOUT WHEELS mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 38/44-8...
  • Page 39 Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 8 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Spare parts and electric diagram www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it Use and Maintenance Manual Page 39/44-8...
  • Page 40 HEAD 32.2 314TO03D TORSION SPRING 32.3 315CB07C WHEEL 32.4 377PR03D WHEEL HOLDER 427LA15D MANDREL STOP 427PRE01A PRESSING DEVICE 428LA07D MOTOR GROUP FIxING BRACKET 900ROND50T GRINDING WHEEL STOP BELLEVILLE WASHER mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 40/44-8...
  • Page 41 Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Chapter 8 Tel.: +39.059.280.888 - Fax: +39.059.282.808 Spare parts and electric diagram www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it Use and Maintenance Manual Page 41/44-8...
  • Page 42: Electric Diagrams

    & tools for the tile & stone professional 8.2 Electric diagram Power socket Thermal protection ON/OFF switch Disk motor Pump motor (if any) AS TO TEChNICAL DATA SEE ThE PLATE VALUE ON EACh COMPONENT. mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 42/44-8...
  • Page 43 Bulldog ADV Via dei Tipografi, 11 - 41122 Modena (Italia) Tel.: +39.059.280.888 - Fax: +39.059.282.808 Warranty certificate www.raimondiutensili.it - e-mail: raiutens@raimondiutensili.it TO BE FRANKED MACHINES & TOOLS FOR THE TILE & STONE PROFESSIONAL MACHINES & TOOLS FOR THE TILE & STONE PROFESSIONAL...
  • Page 44 Warranty certificate machines & tools for the tile & stone professional mod. BULLDOG ADV - eD. 03/2014 - s. 04 Page 44/44...

Table of Contents