Gemmy CarBuddy Airblown ZX-CC12V2A Assembly Instructions

CarBuddy Airblown
™
Contents:

ASSEMBLY STEPS

STEP 1: Ensure zipper on inflatable is fully closed. (see illustration 1)
STEP 2: Locate the loop on the back of the head of the inflatable.
STEP 3: Place loop around the back of the passenger seat headrest. (see illustration 2 )
STEP 4: Plug DC car charger connector into the car's 12V auxiliary power outlet and fan will inflate
(see illustration 3 )
STEP 5: Once fully inflated, place the seat belt's shoulder strap around the inflatable to
secure. (see illustration 4).

Troubleshooting Checklist:

If your Airblown Inflatable is not inflating, the problem may be:
®
1. The power source is disabled or the cord may be unplugged.
a. Check the connection point where fan cord meets the 12V DC Car Charger
Connector and ensure they are securely connected.
b. Unplug and plug in the DC Car Charger Connector into the power outlet.
2. Debris or another object may be blocking the fan.
3. The zipper may not be fully zipped, sealing the Airblown
NOTE: Requires continuous power supply for inflation. CarBuddy™ deflates when car is turned off.
Fan ventilation required for inflation and proper Airblown
WARNING:
Restricted view possible. To ensure proper line of sight for all mirrors, securely attach CarBuddy™ to a properly adjusted
passenger seat.
Do not operate vehicle until CarBuddy™ is secured and inflated and all mirrors are correctly positioned and operational.
The lights within CarBuddy™ are powered by LED lights which are designed to operate longer than traditional
bulbs. These LED lights are not replaceable.
Keep away from open flame.
Wipe clean with a damp cloth and allow to dry before storing away. Use mild detergent if necessary.
For use in car only.
FCC COMPLIANCE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user
Inflatable Assembly Instructions
®
CarBuddy™ Airblown
DC Car Charger Connector
Model No.: ZX-CC12V2A
Input: 12Vdc 2A
Output: 12Vdc 2A
Inflatable.
®
®
Inflatable
®
care.
Illustration1
Illustration 2
Illustration 3
Illustration 4