Advertisement
Frequently asked questions (FAQ)
Q: What kind of battery can be charged by these solar modules?
1. Sealed, open and colloidal lead-acid batteries
2. Portable Power Stations with 36V input voltage (KODAK PPS600, PPS800 & PPS1500) and products
with 18V input voltage.
Q: How to clean the solar surface?
Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth to wipe
the surface of the solar module to remove any remaining dust or dirt. Any guano or other adhesive
should be removed as soon as possible from the solar surface to avoid a reduction in performance.
Q: Are the foldable solar modules waterproof?
To maximize the lifespan of the module, it should not get wet.
18V to 36V switch (only included with KODAK SP100)
Red LED = 36V mode (locked) Blue LED = 18V mode (locked) Purple LED = unlocked switch
How to use the switch:
The default voltage for KODAK SP100 is 18V (blue LED).
If you want to change the output from 18V (blue LED) to 36V (red LED), please follow these steps:
1. Fold the panel open to activate switch.
2. Press the button twice quickly. The LED will turn purple, which means that the switch is unlocked.
3. Press the button again within 3 seconds. This will change the output to 36V (red LED).
4. If you don't press the button within 3 seconds, the output will revert back to 18V (blue LED).
5. Repeat these steps to switch the voltage back from 36V (red LED) to 18V (blue LED).
Safety tips
• Before using the product, read all safety precautions.
• If the product is functioning abnormally or is damaged, do not use it.
• Avoid contact with water and prevent sharp objects coming into contact with the module.
• Only connect the panel to a high quality battery connector to avoid risk of short circuit.
• Do not disassemble or attempt to repair the module.
Warranty & customer service
This product comes with a one year repair, replace or refund warranty. Fuse excluded.
3
Advertisement
