Advertisement
Quick Links
www.online-led-store.com
Phone: 1-855-LED-ONLINE (1-855-533-6654)
Fax: (909) 575-6722
E-mail: support@online-led-store.com
Mounting Instructions:
1. Clean the selected mounting surface area.
2. With the speaker unit rested on a work surface, remove the Bail Strap Bracket from the main body by untightening
the Mounting Bolts for the Bracket. Be careful not to misplace the split washer, washer, and two pieces of
grommet during the disassemble process.
3. Place the Bail Strap Bracket against the selected mounting surface, and mark the spot for at least two mounting
holes.
4. Drill a minimum of two, 1/4" holes in the mounting surface, making sure not to damage any vital components of
the mounting surface.
5. Proceed to secure the Bail Strap Bracket to the mounting surface by utilizing bolts larger than 1/4".
6. Mount the speaker back on to the Bail Strap Bracket. Below is a diagram showing the order the components
should be in.
LAMPHUS
SASP02
100W SLIM Speaker
SKU: PSZAUDSPK002
Online LED Store S2B Inc. ©2013 All Rights Reserved
®
SoundAlert
TM
Advertisement
Summary of Contents for Lamphus SoundAlert SASP02
- Page 1 LAMPHUS ® SoundAlert SASP02 100W SLIM Speaker SKU: PSZAUDSPK002 www.online-led-store.com Phone: 1-855-LED-ONLINE (1-855-533-6654) Fax: (909) 575-6722 E-mail: support@online-led-store.com Mounting Instructions: 1. Clean the selected mounting surface area. 2. With the speaker unit rested on a work surface, remove the Bail Strap Bracket from the main body by untightening the Mounting Bolts for the Bracket.
- Page 2 Wiring Instructions: 1. The SASP02 speaker does not include a siren unit. To activate the speaker, follow OEM instructions for installing the siren unit. 2. Extend both wires to the output terminal of the siren system. Follow siren OEM instructions to properly connect the speaker unit to the siren system.