Connection And Installation P37 - Zidoo NEO S Manual

Connection and Installation
1. HDMI Device Connection
① Connect with TV
Make sure both TV and NEO S are power-off , connect these two devices by HDMI cable from
NEO S HDMI OUT port to TV HDMI IN port. And choose the correct signal source on TV after
powering on.
Note:
*Please use HDMI 2.0 or higher-specifi cation cable and display device to enjoy 4K UHD HDR
experience.
*The small screen will be turned off when playing movie to ensure better movie viewing
experience.
② Connect with TV and AVR
Make sure AVR, TV, and NEO S are all power-off . Two HDMI cables are required in this process,
one cable connect from NEO S HDMI OUT port to AVR HDMI IN port, another cable connect
from AVR HDMI OUT port to TV HDMI IN port. Choose the correct signal source on AVR and TV
respectively after powering on.
HDMI cable
HDMI cable
HDMI cable
AVR
TV
TV
Page 37 Page 37