Advertisement
Quick Links
600-56-0638
HAMMERHEAD 85" ROOF RACK ASSEMBLY
Know Safety, no injury. Know injury, no safety. ̴ A uthor Unknown
READ ALL SAFETY INSTRUCTIONS BEFORE INSTALLATION
o FOLLOW ALL INSTRUCTIONS FOR PROPER ASSEMBLY
o WEAR APPROPRIATE EYE PROTECTION
o EXERCISE CARE WHEN LIFTING COMPONENTS
o USE APPROPRIATE TORQUE FOR BOLTS
o BLUE THREAD LOCKING COMPOUND IS RECOMMENDED ON ALL BOLTS
SUGGESTED TORQUE VALUES FOR STEEL GRADE SAE 5 BOLTS
REV 00 08/14/18
INSTRUCTIONS
ROOF RACK ASSEMBLY INSTRUCTIONS
SAFETY
If there are any questions, call 1-855-HHTOUGH
Page 1
Advertisement
Summary of Contents for Hammerhead 600-56-0638
- Page 1 600-56-0638 HAMMERHEAD 85” ROOF RACK ASSEMBLY INSTRUCTIONS ROOF RACK ASSEMBLY INSTRUCTIONS SAFETY Know Safety, no injury. Know injury, no safety. ̴ A uthor Unknown If there are any questions, call 1-855-HHTOUGH READ ALL SAFETY INSTRUCTIONS BEFORE INSTALLATION o FOLLOW ALL INSTRUCTIONS FOR PROPER ASSEMBLY...
- Page 2 600-56-0638 PARTS LIST REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. If there are any questions, call 1-855 HHTOUGH or email HHORDERS@hammerheadarmor.com TOOL LIST 1. A Good Friend 2. Basic Tool Kit 3. Torx 40 socket 4. 13mm wrench 5.
- Page 3 600-56-0638 III. ROOF RACK ASSEMBLY 1. Attach the 4 sides together and then to the front and back of the roof rack. There are 3 bolt locations at each joint. (shown) Using the torx 40 socket and the 13mm wrench install 18 bolts, washers and nuts from hardware kit #112.
- Page 4 600-56-0638 3. Use the 7/16 socket and 7/16 wrench and the bolts from hardware kit 57 to install the 4 light brackets on the front and back of the roof rack as shown. 4. Use hardware kit #114 to install to your vehicle as you see fit.