1. ASSEMBLED P.W.B ADJUSTMENT..................................................................................................................12
1-1.
1-2.
Comb Filter Operation Check ................................................................................................................15
1-3.
Audio Operation Check ..........................................................................................................................15
2. FINAL ASSEMBLY ADJUSTMENT ..................................................................................................................16
2-1.
Raster Position........................................................................................................................................16
2-2.
2-3.
2-4.
*IMPORTANT
For many of the above adjustments, it is necessary to have an HDTV (1080i) signal generator, SDTV (480P) sig-
nal generator, as well as the usual NTSC (480i) signal generator.
Hitachi recognizes that few companies offer HDTV or SDTV signal generators and that the cost of these genera-
tors is sometimes prohibitive. For this reason, we suggest the use of a set-top-box for HDTV and SDTV adjust-
ments. Usually, there is a switch on the set-top-box which enables it to output HDTV (1080i) or SDTV (480P) sig-
nals even with no input. In this case, the sync is automatically detected by the TV (at the Y-P
rear panel).
SERVICE ADJUSTMENTS
11
P
Inputs on the
B
R