SAFETY CAUTIONS People who has an artificial heart pacemaker, who has similar electric medical device should avoid using or nearing this device. For professional use only. Avoid wearing a ring, other metal jewelries, key, watch or any metal gadget, any cloth that has metal rivets nearing the induction coil, electromagnetic induction may cause high temperature of such metal parts and may lead to skin burn or burning of cloth.
DEVICE DESCRIPTION ON/OFF Switch Tightening Bolt Induction Coil Air Vent Indication Light OPERATION STEPS 1.Release the 2 fixing bolts contraclockwise 0.5cm out. 2.Select appropriate size of coil for your work and insert the two ends into the front holes. 3.Twist the bolts clockwise to fix the coil tightly. Fix the coil to this place 4.
Page 5
USE RULES 1.This device is built in the over heat protection, it will shut itself off to prevent damage from overheat, you can use it after the temperature back to normal . 2.Please try not to use it over 2 minutes one time, although the device is built in the over heat protection, however, life spam of the device may be reduced.
Page 6
BOLT HEATING PARAMETERS Coil Diameter(mm) Up to 20mm Up to 30mm Up to 40mm Bolt Diameter Notice: The diameter of the coil must minimum 10mm larger than the bolt diameter. Heating capabilities (Based on the 22mm bolt, room temperature 25°C ) Heating time: Continues up to 3 minutes.
TROUBLE SHOOT Items Solutions No response after pressing 1. Check if the plug is broken; “ON” button, no indication 2. If plug is firmly plugged in; light on, no fan working, no 3. If the switch on the socket is on; increasing heat of heating 4.