Do you have a question about the Elliot and is the answer not in the manual?
Questions and answers
Jonas Höglund
March 20, 2025
Hej, I have an Elliot and the power is connected, but it doesn't get warm. What could be wrong? Is there a part that could be easily changed by an electrician, in order to remove this problem?
1 comments:
Mr. Anderson
May 14, 2025
If the PAX Elliot is connected to power but not getting warm, the issue could be due to a faulty electrical connection, incorrect installation, or a malfunctioning internal component. According to the manual, the electrical connection must follow the specified wiring instructions using the supplied terminal block and junction box. If these are not properly connected, the unit may not function.
An electrician can check the terminal block, junction box, and wiring for faults. These components are accessible and can be replaced or corrected by a qualified technician. The electrician should disconnect power before servicing and verify grounding and connections according to the installation diagrams.
Page 1
Illustrationer / Illustrations / Illustrasjoner / Kuvitukset Bruks- och monteringsanvisning User and Installation guide Bruks- og monteringsanvisning Käyttö- ja asennusohje руководство по установке Pax Elliot 540x700 mm Pax Fredrik 540x700 mm års garanti year warranty Pax Iris 700x540 mm Pax Paulina 450x700 mm 009-620061-D 141118 Hälleforsnäs, Sweden...
Page 2
Sladden finns som tillbehör hos återförsäljare och tillverkare. Installation Pax Paulina, Elliot, Iris och Fredrik är anpassade för dold och utanpåliggande anslutning och får endast installeras av behörig installatör. Handdukstorken får endast monteras med strömbrytaren vänd nedåt. Dold elanslutning: 1.
Page 3
Velg riktig borr til veggmatriale. Forsikre deg om at det ikke er noen skjulte ledninger i veggen før du borrer. Tett alle Pax will not accept any responsibility if drilling has taken place without checking the unit. Choose a drill that is suita- skruehull med silikon eller annet tilpasset tetningsmasse for og forhindre fuktintrengning i veggen.
Page 4
Pax Paulina, Elliot, Iris ja Fredrik pyyhekuivaimien sähköasennus voidaan tehdä kiinteästi (piiloasennus) tai lisätarvik- keena saatavan pistotulppajohdon avulla. Sähköasennuksen saa tehdä vain valtuutettu sähköasentaja. Pyyhekui- Модели Paulin, Elliot, Iris, Fredric предназначены для скрытого или наружного подключения. Все операции по установке и vain asennetaan aina käyttökytkin alaspäin.
Need help?
Do you have a question about the Elliot and is the answer not in the manual?
Questions and answers
Hej, I have an Elliot and the power is connected, but it doesn't get warm. What could be wrong? Is there a part that could be easily changed by an electrician, in order to remove this problem?
If the PAX Elliot is connected to power but not getting warm, the issue could be due to a faulty electrical connection, incorrect installation, or a malfunctioning internal component. According to the manual, the electrical connection must follow the specified wiring instructions using the supplied terminal block and junction box. If these are not properly connected, the unit may not function.
An electrician can check the terminal block, junction box, and wiring for faults. These components are accessible and can be replaced or corrected by a qualified technician. The electrician should disconnect power before servicing and verify grounding and connections according to the installation diagrams.
This answer is automatically generated