Page 1
ENGLISH USER MANUAL CLOTHES IRONING MACHINE WITH ROLLER ’’ROLLMAN’’ MP 8015 E MODEL-80151000012 E NB 2494 И 005 20...
Page 4
IMPORTANT INSTRUCTIONS FOR HANDLING, MAINTENANCE AND SAFETY Before first use of the machine for ironing clothes with a roller (hereinafter referred to as ironing machine) please read these instructions for use and maintenance in order to avoid accidents, injuries and damage to your device. 2 / 28...
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH CONTENTS IMPORTANT INSTRUCTIONS FOR EQUIPMENT SAFETY ......5 Purpose of the machine for clothes/laundry ironing ........5 Technical safety ......................5 Use of the laundry ironing machine ..............6 Additional equipment and parts ................7 THE MAIN PARTS OF THE MACHINE FOR IRONING ........8...
Page 6
Cleaning and replacing the roller envelope ............. 21 Replacing the roller envelope ................21 FREQUENTLY ASKED QUESTIONS ..............23 POST SALES SUPPORT ................... 24 ’’ROLLMAN’’ SUPPORT ..................24 CONNECTION TO ELECTRICITY ................24 TECHNICAL DATA FOR LAUNDRY IRONING MACHINE ......25 HELP PROTECT THE ENVIRONMENT ............... 26 Packaging disposal ....................
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH IMPORTANT INSTRUCTIONS FOR EQUIPMENT SAFETY Purpose of the machine for • After unpacking the machine for ironing check the machine for any clothes/laundry ironing visible damage. • The main purpose of this product •...
CHILDREN, WITHOUT APPROPRIATE machine for ironing ''Rollman''. SUPERVISION. During the warranty period repairs In case of power failure while ironing can be done only by a qualified the material for ironing, pull back the service technician.
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH Additional • Do not place the power cord over the cover of a hot ironing element equipment and parts because it may damage the cable, You must use only original accessories and then cause electric shock.
THE MAIN PARTS OF THE MACHINE FOR IRONING Control board Heating plate for ironing Setting the temperature Finger protection Roller with envelope Inductor of material for ironing Holder for pressed material Workbench for pressed material Power supply cable Foot board of the machine stand Handle for assembly / disassembly of machine Safety lever 8 / 28...
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH Control board of the ironing machine Take the machine with one hand on the workbench, and another on the 1. Switch for turning the machine for lower part of the coupling (as shown in...
Safety lever To bring the workbench in a vertical position, or prepare the machine for Safety lever serves to separate the ironing to be moved, pull the lever ironing element from the roller in case (interlock) and press the desk until of power failure.
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH BEFORE THE FIRST USE OF IRONING MACHINE Power supply cable Preparing the operating zone (Workspace) The power supply cable is wrapped and hung on the back, below the workbench Place the following near the device: on a vertical column of the device.
Preparation of materials for Sorting ironing Sort the material by fabric type and the amount of heat required for their For easy and quick ironing of material ironing. it is very important to properly prepare the material that you want to iron. Start ironing at a lower temperature Before ironing, ironing materials and gradually increase the temperature...
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH Temperature Type of fabrics Mark on the knob Minimum Perlon, nylon Medium Wool, silk Maximum Cotton, linen IRONING Turning the machine for exchanges heat to the respective half of the ironing element (heating plate).
• When the knob is in the final such as shirts and blouses. Also, it is position, temperature of the ironing best to choose the low speed of the element is 185°C. roller when ironing multiple folded items and thick things, since it may take more than one pass through the rollers to get well ironed and dry material.
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH holding down the board to the end. For work it is recommended to wear footwear with a soft surface (training shoes, slippers ...) with no rough or sharp parts so as to prevent mechanical damage.
If necessary, dampen the material To protect the ironing element (heating again with a wet cloth or spray water. plate) avoid ironing material with volatile temperature volatile and large buttons If possible, always use the whole width and other parts that are not heat resistant. of the roller for ironing otherwise certain parts will dry out and lose their To prevent scratching the surface of...
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH TIPS FOR IRONING DIFFERENT MATERIALS Tablecloths Napkins, hand towels At the beginning of ironing avoid Place the ironing material in sufficient making the edge of the tablecloth in surface of the fabric to the inducer.
Shirts Note: Place the buttons towards the roller. Before you start ironing shirts remove the inducer. Start ironing the material carefully guiding the sheet over the left end of Shoulders of shirts: First iron the the roller, taking care not to damage shoulder area by sliding this part of any button.
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH Front sides of shirts: When ironing Cuffs and sleeves: First on the left front of the shirt place openings for end of the roller iron both sides of the buttons over the left end of the roller cuff.
Pressing woolen items and seams on the part over which you have placed a clothing. damp cloth is pressed with the ironing element (heating plate). Press each pant leg by the ironing element (heating plate) on both sides starting from the fold of the trouser leg.
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH through the machine like with ironing. • Turn off the heater, so that Clean the appliance using a clean dry the buttons for controlling the cloth with no cleaning agent to remove temperature are set to position 0.
Page 24
• Do not let the strips in rotation get inside the envelope. • Once the roller turns three or four rotations and the end of the roller envelope gets under ironing element (heating plate): • Turn off the machine by foot and keep holding the board on the stand of the machine.
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH FREQUENTLY ASKED QUESTIONS REPAIRING THE MACHINE FOR LAUNDRY IRONING SHOULD BE IMPLEMENTED ONLY BY AUTHORIZED SERVICE SHOPS IN ACCORDANCE WITH LOCAL AND NATIONAL REGULATIONS AND LAWS. REPARATIONS BY UNAUTHORIZED REPAIRERS MAY CAUSE INJURY AND DAMAGE TO THE MACHINE FOR IRONING.
Do not connect the ironing machine During this period, the manufacturer to the mains via an extension cable. of the machine for ironing clothes Extension cord does not guarantee the ''Rollman'' will remove all problems or necessary security for the operation 24 / 28...
User Manual for Clothes Ironing Machine MP 8015 E – E-Ver. 2/2021. ENGLISH ATTENTION: of ironing machine, due to possible THE MACHINE MUST BE GROUNDED. overheating of the extension cord. ____ TECHNICAL DATA FOR THE LAUNDRY IRONING MACHINE Characteristics Value/description...
HELP PROTECT THE ENVIRONMENT ____ Packaging disposal The styrofoam used in the packaging is recyclable. Please turn it in for recycling. All plastic parts (ribbons, bags, etc.) should be kept away from children because they can suffocate. ____ Disposal of an old, out of use machine for ironing Ironing machines contain most of the materials that can be recycled.
Need help?
Do you have a question about the MP 8015 E and is the answer not in the manual?
Questions and answers