Canon PowerShot SD500 Digital ELPH User Manual page 158

Power Lamp
• A TV set cannot be used in Stitch Assist mode.
• Refer to pp. 49, 56 for instructions regarding the video output signal.
• No image will appear on the LCD monitor when the camera is
connected to a TV.
• If the TV is a stereo model, you can plug the audio plug into either
the left or right Audio In jack. Please refer to the TV's manual for
details.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 56). The default setting
varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may not
display properly.
156
Press the power button until the
5
power lamp lights green.
• The image will appear on the TV. Shoot or
play back images as usual.
• Press the DISP. button when images are
not being displayed on the TV when
shooting.