Memory Card; Recording - Sony Handycam NEX-VG20E Handbook

The image in the viewfinder is not clear.
Move the viewfinder lens adjustment lever

until the image appears clearly (p. 26).
Red, blue or green flickering in the
viewfinder.
You may see colors (red, blue, green)

shimmering in the viewfinder when you move
your line of sight. This is not a malfunction.
The shimmering colors will not be recorded
on the memory card.

Memory card

Operations using the memory card
cannot be performed.
If you use the memory card formatted on a

computer, format it again on your camcorder
(p. 82).
Images stored on the memory card
cannot be deleted.
The maximum number of images that you can

delete on the index screen at one time is 100.
You cannot delete the protected images.

The data file name is not indicated
correctly or flashes.
The file is damaged.

The file format is not supported by your

camcorder (p. 102).

Recording

Refer also to "Memory card" (p. 90).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE

to turn on the (Movie) or
(p. 31).
Your camcorder is recording the image you

have just shot on the memory card. You
cannot make new recording during this
period.
The memory card is full. Delete unnecessary

images (p. 50).
Total number of movie scenes or photos

exceeds the recordable capacity of your
camcorder. Delete unnecessary images (p. 50).
The temperature of your camcorder is

extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is

extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
The lens is not attached correctly. Reattach

the lens.
The access lamp remains lit or flashing
even if recording was stopped.
Your camcorder is recording the scene you

have just shot on the memory card.
The imaging field looks different.
The imaging field may look different

depending on the condition of your
camcorder. This is not a malfunction.
The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the

time available for recording may be shorter, for
example when recording a fast moving object,
etc (p. 97).
The camcorder stops operating.
The temperature of your camcorder is

extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is

extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
(Photo) lamp
There is a time difference between the
point when START/STOP is pressed and
the point that the recording movie is
started or stopped actually.
On your camcorder, there may be a slight

time difference between the point where you
GB
0