Table of Contents
Advertisement
(Warning indicator pertaining to
memory card)
Slow flashing
Free spaces for recording images are running
out. For the type of memory card you can use
with your camcorder, see page 22.
No memory card is inserted (p. 22).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
media (p. 61), delete unnecessary images, or
format the memory card (p. 89).
The image data base file may be damaged.
Check the data base file by touching
(MENU) [Setup] [
[Repair Img. DB F.] the recording
medium (HDR-CX560E/CX560VE/CX700E/
CX700VE).
The memory card is damaged.
(Warning indicators pertaining to
memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p. 89).
(Warning indicator pertaining to
incompatible memory card)
Incompatible memory card is inserted (p. 22).
(Warning indicator pertaining to
the write-protect of the memory card)
The memory card is write-protected.
Access to the memory card was restricted on
another device.
(Warning indicator pertaining to the
external media device)
The image database file may be damaged.
Check the database file by touching
(MENU) [Setup] [
[Repair Img. DB F.] the recording
medium.
(Media Settings)]
(Media Settings)]
GB
106
The external media device is damaged.
(Warning indicator pertaining to
formatting of the external media device)
The external media device is damaged.
The external media device is not formatted
correctly.
(Warning indicator pertaining to the
flash)
Fast flashing
There is something wrong with the flash.
(Warning indicator pertaining to
camera-shake warning)
The amount of lights is not sufficient, so
camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
(Warning indicator pertaining to
photo recording)
The recording media is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
When [
REC Mode] is set to [Highest
Quality
] or [50p Quality
capture photos while recording movies.
Furthermore, if [
Frame Rate] is set to
[25p], you cannot record photos while the
camcorder is in movie recording standby
mode.
Tips
You may hear a melody when some warning
indicators appear on the screen.
], you cannot
Advertisement
Chapters
Table of Contents
