Sony Handycam HDR-CX500E Handbook page 99

 ON
OFF

Notes
You must set the date and time on your camcorder before using your camcorder (p. 22).

There may be discrepancies of a few seconds even if [AUTO CLOCK ADJ] is activated.

The clock is adjusted automatically by [AUTO CLOCK ADJ] when you turn off your camcorder if the

camcorder is receiving a GPS signal while it is being used. The clock is not adjusted until the camcorder
is turned off. Also, the clock is not adjusted unless the camcorder is receiving a GPS signal, even if the
GPS switch is set to ON.
 AUTO AREA ADJ (Auto area adjustment) (HDR-CX500VE/CX505VE/CX520VE)
Your camcorder will compensate for a time differences with the current area automatically
when it detects a time difference, by acquiring the current location information from GPS.
Set the GPS switch to ON in advance.
Steps
(MENU)

[AUTO AREA ADJ]

 ON
OFF

Notes
You must set date and time on your camcorder before using your camcorder (p. 22).

 SUMMERTIME
You can change this setting without stopping the clock. Set to [ON] to move the time forward
1 hour.
Steps
(MENU)

[SUMMERTIME] a desired setting

 OFF
ON

LANGUAGE SET
You can select the language to be used on the LCD screen.
Steps
(MENU)

[ LANGUAGE SET]
Tips

Your camcorder offers [ENG[SIMP]] (simplified English) for when you cannot find your native tongue

among the options.
Adjusts the clock automatically.
Does not adjust the clock automatically.
[CLOCK/ LANG] (under

a desired setting

Compensates for the time difference with the current area automatically.
Does not compensate for the time difference with the current area
automatically.
[CLOCK/ LANG] (under


Does not set the summertime.
Sets the summertime.
[CLOCK/ LANG] (under

a desired setting

[GENERAL SET] category)
 
[GENERAL SET] category)
 
[GENERAL SET] category)
  



