Subscribe to Our Youtube Channel
Related Manuals for LION SG4000
Summary of Contents for LION SG4000
- Page 1 SG4000™ SMOKE GENERATOR ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| USER’S MANUAL ORIGINAL USER’S MANUAL Version 1.1 06/01/20...
-
Page 2: Table Of Contents
Contents General Control Units Usage Advanced settings Accessories Technical specifications: Maintenance Error Messages Warnings and recommendations Synopsys... -
Page 3: General
The machine accepts a variation of temperature of a few degrees. As soon as a deviation is detected, the smoke production will be toned down. In practice, these variations of smoke productions will not be noticed. The SG4000™ is developed to use LION’s Smoke Liquid. The machine and smoke liquid are tuned to produce an optimal result. -
Page 4: Control Units
Control Units Rear Panel On/Off Switch Switch to turn on and off the machine Electric plug Plug for the electric cable Fuse box Fuse: 10A-T HRC. DMX / RC-entry Remote control cable plug DMX exit Exit for DMX equipment Control Panel Keys: SMOKE Smoke production/Boost as long as this is pressed in... - Page 5 Multifunctional display Liquid Level Amount of liquid remaining Temperature Relative temperature (in %) of the heater. As long as the machine is heating up, the text “TEMP” will be flashing. Once the heater reaches optimal temperature, the word “TEMP” will no longer flash. Mode Actual modes of the smoke generator: WARMING UP...
-
Page 6: Usage
Filling the Smoke Liquid tank Fill the smoke liquid tank with LION smoke liquid. Never fill the tank to the brim. Make sure the level stays at least under the neck of the tank. Use a funnel when filling the tank so as to avoid spillage. - Page 7 Smoke Boost Wait until the machine is ready, push the “SMOKE” button and hold it down. When the machine is hot enough, a large quantity of smoke will be produced for 20 seconds (140% density). After that, the machine will switch back to normal density (100%) If the heater isn’t warm enough, it will immediately switch to 100% density and skip the boost mode.
- Page 8 Remote Control The generator can be operated at distance thanks to the optional wired remote control. As long as the button is pressed, the generator will produce smoke based on the chosen smoke density. Select the smoke density by using the “UP” and “DOWN” buttons on the generator. Plug the remote control in at the back of the generator.
-
Page 9: Advanced Settings
Advanced settings The advanced settings are reachable via the menu which is based on a tab structure. Program Automatic program/Manual timer program Setup Setting up power, language and restoring factory settings Channel settings for DMX Settings for wireless remote control To open the menu and change settings: Press the “MENU”... - Page 10 Manual Timer Program Menu The menu shows all available tabs. As soon as the “RUN” button is pressed, the generator will wait Delay during the selected delay time before starting the program. Set the delay to 0:00 to deactivate the delay. Mode TIMER means Manual Timer Program Smoke Time...
- Page 11 Setup menu Power The power (2) of the generator is adjustable to 1000W or 2000W. This allows you for example to work multiple generators of one plug. Smoke production will automatically be adjusted so that a continuous production of smoke is still possible.
- Page 12 Restoring Factory Settings This will restore all factory settings except for the language. To restore factory settings: Open the menu and go to the tab “SETUP”. Select factory settings (4) with the cursor. Press the “ENTER” button. The display will show “READY” and the factory settings will be restored.
- Page 13 Wireless Remote Control (RC) Wireless Remote Control settings The wireless RC had two groups of buttons: group A and group B. This allows for two generators being controlled at the same time by one remote. Group A uses the top 4 buttons of the RC. Group B uses the bottom 4. The four buttons have the same function as the four buttons on the left of the generator display.
- Page 14 Changing the RC identification code Every RC has its own identification code. It can happen that multiple RC’s share the same code. The consequence is that the generator is controlled by many RC’s at the same time even though that may not be wished. In that case, the identification code of the RC can be changed.
-
Page 15: Accessories
Accessories Smoke Liquid This generator was designed to be used with LION Smoke Liquid. Use of other smoke liquid can lead to damage to the generator. The warranty is void as soon as another liquid is u sed with this generator. -
Page 16: Technical Specifications
Connecting cable: connecting cable 14AWG x 3, length 10ft, NEMA 5-15P. • Warm up time from cold: 7 min. *Smoke production with LION Smoke Liquid is satisfies all legislation concerning disco use. Technical Specifications Wireless Remote: • Range: 30 meters metres in the open field •... -
Page 17: Maintenance
Any damage caused by wrong use, fall damage or other external factors are not covered by the warranty. The warranty will immediately be voided if other liquids other than the ones sold by LION are used. The warranty starts the second the generator leaves LION Fire Training Products. -
Page 18: Error Messages
LION Manual SG4000™ Error Messages As long as one or multiple errors are present, the generator will produce no smoke. In some cases, the heating elements will be turned off depending on the type of error. Error messages are displayed on the screen as “E x”. -
Page 19: Warnings And Recommendations
EXERCISES WHERE THE QUANTATIES ARE LARGE, WE ADVISE THE USE OF A FILTER MASK. ONLY USE SMOKE LIQUID PRODUCED AND SOLD BY LION IN THE SG4000™. IN CASE OF USE OF ANY OTHER SMOKE LIQUID, THE WARRANTY IS IMMEDIATELY VOID. -
Page 20: Synopsys
Synopsys Setting up and powering up. Attach the cable to the back of the SG4000™ and plug it into a socket (230V / 10A). Turn on the generator. Wait until the display shows “READY”. The SG4000™ smoke generator is ready to be used. - Page 21 LION Protects B.V. Industrieweg 5 5111 ND Baarle-Nassau the Netherlands T: +31 (0)13 507 6800 F: +31 (0)13 507 6808 E: infoEMEA@lionprotects.com WWW.LIONPROTECTS.COM ||||||||||||||||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||| © LION Group, Inc. All rights reserved. Version 1.1 voorbehouden. 06/01/20 - 1 -...
Need help?
Do you have a question about the SG4000 and is the answer not in the manual?
Questions and answers