Hama Freedom Light III Operating Instructions Manual page 6

g Operating Instruction
1. Product Description
Freedom Light III is compatible with most Bluetooth
mobile phones. The Text-To-Speech function
announces instructions in 5 different languages
(English, French, Germany, Italian, Spanish) and
also indicates the status of the Bluetooth device.
More than that, it also announces the name /
number of the incoming caller. Fully portable, it is
an ideal wireless communication solution for in-car
or offi ce use. Built-in with echo cancellation and
noise suppression, Freedom Light III Bluetooth
Speakerphone provides you with impeccable sound
quality in full duplex mode.
2. Product Overview
(1) Microphone
(2) Volume Down
(3) Mute Button
(4) LED
(5) Charging Socket
(6) Volume Up
(7) MFB Button(Multi-Function Button)
(8) Speaker
3. Charging
Freedom Light III uses a popular Micro USB charging
socket. Coming with USB charging cable and USB
car charger.
1) Before use, please charge the device for 3.5
hours to make sure the speakerphone is fully
charged and the battery reach its full capacity
Afterwards, each charge cycle may take up to
3 hours.
2) LED will indicate red in charging and off when
charging is complete.
3) If you have not use the item for a few months, LED
might not turn red when fi rst charging. It might
take 15-35 minutes before the LED turn red.
093540man_de_el_en_es_fr_it_nl_pt_.indd Abs1:5 093540man_de_el_en_es_fr_it_nl_pt_.indd Abs1:5
4. Pairing / Connect
It is important to pair the speakerphone with your
Bluetooth device for the fi rst time use.
Pairing procedure:
A. Ensure the speakerphone is off
B. Press and hold the MFB button for 4 seconds until
LED blink and unit announces 'pairing
mode, pls...'
C. Go to Bluetooth of your mobile phone, searching a
new device.
D. Once found "Freedom Light III'', follow the steps
and enter pin code 0000 to pair;
E. Connect the speakerphone to the device.
F. Speakerphone is ready for use until announces
'phone is ready for use'.
Once paired and connected, the speakerphone will
be automatically connected to the device whenever
you turn the speakerphone on again, provided the
device is in the range.
5. Basic Operations
5.1 Speakerphone on / off
Turn on the speakerphone
From off mode, press and hold the "MFB" button for
3 seconds, LED indicates ("Power On" is announced)
Turn off the speakerphone
From on mode, press and hold the "MFB" button
for 3 seconds, LED indicate Red ("Power Off" is
announced).
Please Note:
To save power, the speakerphone will automatically
turn off if it is not connected to any device for more
than 10 minutes.
5.2 Answer a call
Press the MFB briefl y to pick up the call.
5.3 Reject a call
Press and hold the MFB for 3 seconds.
5.4 Re-dialing
Press the MFB button twice for last number
redial.
5
09.04.10 11:0 09.04.10 11:0