≥
To remove from the TV:
E
Adjusting the panel to your desired
angle
55-inch model
65-inch model
Do not place any objects within the full rotation range.
≥
Removing the pedestal
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
48-inch model
1 Put the TV onto a work table with the screen panel
down on the clean and soft cloth.
2 Pull out the pedestal from the TV.
55-inch model
65-inch model
1 Remove the cable cover E.
2 Remove the assembly screws D from the pedestal.
3 Pull out the pedestal from the TV.
12
English
(View from the top)
Preventing the TV from falling over
It is recommended to secure the pedestal to a furniture
as shown to prevent the TV from falling over.
This information is designed to reduce the risk of
≥
injuries caused by the TV falling over. However, no
measure can guarantee protection in all cases.
Attaching the fall-prevention parts
F Screw (1) (
G Wood screw (1)
H Band (1)
15°
15°
48-inch model
1
Remove the screw.
2
Attach the fall-prevention parts.
55-inch model
55-inch model
65-inch model
G
H
65-inch model
)
F
G
H