turn off the lubrication, please turn clockwise to the end. Turn counterclockwise
to start lubrication supply. Lubrication has 3 phases, from minimum to maximum
only works on the process of apron moving.
5. There is a control panel at the right hand side of the apron. Each button on the
control panel is "A" Spindle Forward/Reverse, "B" Jog button. To control
spindle Forward or Reverse, press the start button and start cutting. To stop
cutting, please press the stop button in the middle. For emergency stop, please
press Emergency Stop.
6. There is an operation box with control panel at the right hand side of the apron.
7. Left side buttons on the control panel are spindle forward & reverse and jog
button. To control the spindle forward and backward, press the start button and
start cutting. If operator wants to stop cutting, press the stop button in the middle
of the panel. For emergency stop, please press the emergency button on the right
top side button on the panel.
1. Spindle Forward/Reverse
3. Emergency Stop
5. Spindle OFF
2. Spindle ON
4. Jog Button
6. Rapid X/Z Traverse
19