OrienTek TOC-250 Instructions

TOC-250 Optical Fiber Cleaning Pen Instructions
External function description
C. Lock Button
D. Outer Shell
B. Nozzle
A. Tip
F. Indicator
E. Guide Cap
Standard Mode
N . o P a t r N a m e
A T p i
L e a d h t e
B Nozzle
Lead tip to the optical connecter end face.
C Lock Button
Push the button to extend and contract the nozzle.
D
Outer Shell Push the outer shell to clean the connector.
E Guide Cap
Acts as dust cap or cleaning adapter for connector plug.
F Indicator
Provides indication of remaining cleaning cloth.
Connector inside adaptor
1. Remove Guide Cap from the device.
Guide Cap
2. Insert tip of cleaner into SC Adaptor.
Standard Mode
Note: This drawing shows only SC, but this product can clean ST and FC too.
3. Push the Outer Shell to start cleaning the
SC connector end face. A "click" sound
indicates end of cleaning process. Close the
cover after use.
Be careful not to slant the Cleaner SC while inserting
into the adapter.
Do not overly exert force during insertion as this may
cause damage to both the connector and the Cleaner SC.
If pushing Outer Shell is inhibited, remove
Cleaner SC from adapter and ensure
that there is no sizeable debris inhibiting the cleaning
process.
Push Lock Button
Pull Nozzle
Pull Nozzle while
pushing lock button.
Extended Mode
F u n t c o i n
c e l a n n i g c o l h t o t h t e o p c i t a c l o n n e t c r e
SC Adaptor
Extended Mode
CLICK !!
Identification of remaining cloth
Full
多
Little
少
Empty
無
e n d a f c . e
Connector plugs alone
1. Open the Cover on the Guide Cap.
2. Insert SC connector into the Guide Cap.
Note: This drawing shows only SC, but this product can clean ST and FC too.
3. Push the Outer Shell to start cleaning the
SC connector end face. A "click" sound
indicates end of cleaning process. Close the
cover after use.
Be careful not to slant SC connector while inserting
into the Guide cap.
Do not overly exert force during insertion as this may
cause damage to both the connector and the Cleaner SC.
If pushing Outer Shell is inhibited, remove
Cleaner SC from adapter and ensure hat there is no
sizeable debris inhibiting the cleaning process.
View of Indicator View of the Nozzle end
Cloth
(White)
Cloth
(White)
Red
Red
Guide Cap
Cover
SC Plug
CLICK !!
Push straight.
Tip (Black)
Cloth (White)
Tip (Black)
No Cloth
(Black)