Advertisement
4. The jar and knife blade can be used for chopping meat, but the meat must be
boned and cut into small cubes, and the max quantity shall not exceed 30g.
Note: The max operation time shall not be more than 20s.
5. Attach the jar lid onto the jar.
Note: Be sure jar lid is securely locked in place before operating appliance.
6. Insert the bottom part of motor unit into the opening on the jar lid, and turn in
clockwise direction to lock.
7. Plug the appliance into power outlet.
8. Select proper speed button to press and hold it, the appliance starts operation.
When using the low speed button, you can adjust the speed adjusting dial on the top
of motor unit for different speed.
Note: the speed adjusting dial is not suitable for the high speed button。
9. Release the speed button to stop operation when the food is chopped to your
desire.
Note: During operation, you can insert the food through the feed tube and use the
food pusher to press it if necessary, never use your finger to preventing hurting.
10. Turn the motor unit in anti-clockwise to detach it from the jar lid.
11. 11. Always remove the blade assembly before pouring out the contents in jar.
C: Instruction for whisking attachment
The whisking attachment is mainly suitable for whisking egg white.
1. To assemble whisk with the motor unit, turn the whisk anti-clockwise until
tightened.
2. Place egg white into the blending jar, generally, two egg whites are enough.
3. Plug the appliance into power outlet.
4. Lower the whisk into food and select proper speed button to press and hold it, the
appliance starts operation. When using the low speed button, you can adjust the
speed adjusting dial on the top of motor unit for different speed.
Note: the speed adjusting dial is not suitable for the high speed button。
Note: Max operation duration at high speed per time shall not exceed 1
minute.
5. Release the speed button to stop operation when the eggs are whisked well.
6. Always unplug the power outlet when not use.
CLEANING AND MAINTENANCE
Unplug the appliance from the socket and wait until the blade stops completely
7
Advertisement
