Download Print this page
DigiTech XC0439 User Manual
DigiTech XC0439 User Manual

DigiTech XC0439 User Manual

Wireless soil moisture & temperature sensor

Advertisement

Quick Links

WIRELESS SOIL MOISTURE & TEMPERATURE SENSOR
Thank you for selecting this Wireless Soil Moisture & Temperature sensor.
This manual is used for AU version. Please read the instructions carefully
according to the version you purchased and keep the manual well for future
reference.
IMPORTANT NOTE
- Read and keep these instructions.
- Do not cover the ventilation holes with any items such as newspapers, curtains
etc.
- Do not clean the unit with abrasive or corrosive materials.
- Do not tamper with the unit's internal components. This invalidates the
warranty.
- Only use new batteries. Do not mix new and old batteries.
- Do not dispose of old batteries as unsorted municipal waste. Collection of such
waste separately for special treatment is necessary.
- Attention! Please dispose of used unit or batteries in an ecologically safe
manner.
- Technical specifications and user manual contents for this product are subject
to change without notice.
CAUTION
- Danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type.
- The battery cannot be subjected to high or low extreme temperatures, low air
pressure at high altitude during use, storage or transportation.
- Replacement of a battery with an incorrect type can result in an explosion
or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting
of a battery, can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment
can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
- An appliance is only suitable for mounting at a height of less than 2m.
XC0439
User Manual
OVERVIEW
1
2
3
4
5
6
7
1. Transmission status LED
2. Sensor metal probe
3. Moisture sensor
4. Wall mounting holder
5. [CHANNEL] slide switch
to assign the sensor to
Channel 1,2,3,4,5,6 or 7
6. [ RESET ] key
7. Battery compartment

Advertisement

loading

Summary of Contents for DigiTech XC0439

  • Page 1 OVERVIEW WIRELESS SOIL MOISTURE & TEMPERATURE SENSOR XC0439 User Manual Thank you for selecting this Wireless Soil Moisture & Temperature sensor. This manual is used for AU version. Please read the instructions carefully according to the version you purchased and keep the manual well for future reference.
  • Page 2 GETTING STARTED SOIL MOISTURE DISPLAY Soil moisture can be clarified into 5 different levels: Very Dry, Dry, Moist, 1. Remove the battery cover. Wet and Very Wet. 2. Slide the [ CHANNEL ] slide switch to choose a channel. 3. Insert 2 x AA size batteries into the battery compartment according to the To determine the moisture of soil, the sensor calibrates the moisture into polarity mark on the battery compartment.
  • Page 3 SENSOR PLACEMENT SPECIFICATIONS Select the suitable installation site that inserts the sensor probes into the Dimensions (W x H x D) 125 x 58 x 19 mm (4.9 x 2.2 x 0.7 in) soil around 100mm (4 inch) and the sensor should be placed within 30 Weight 144g (with batteries) meters of the display console to get the best transmission performance.