Table of Contents
Advertisement
Quick Links
User's
RF Signal Detector
Model #2E7501
Contents:
Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Powering Up the Detector . . . . . . . . . . . . . . . . . . . . . . . .2
Understanding the LCD Screen. . . . . . . . . . . . . . . . . . . .3
Guarantee & Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
Appearance of device and accessories may vary.
Note: This manual contains important safety and operating information.
Please read and follow the instructions in this manual. Failure to do so could
be hazardous and result in damage to your Signal Detector.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wilson Electronics 2E7501
Summary of Contents for Wilson Electronics 2E7501
- Page 1 User’s RF Signal Detector Model #2E7501 Contents: Purpose ........1 Powering Up the Detector .
- Page 2 C. 2’ Extension Cable RG58, N-Male to N-Male (951134) Appearance of device and accessories may vary. To purchase, contact Wilson Electronics Sales Department at: 800-204-4104 Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.-Fri. Hours: 7 am to 6 pm MST.
- Page 3 NOTE: Utilize the velcro included in this kit to secure Battery Pack to bottom side of Signal Detector. Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.-Fri. Hours: 7 am to 6 pm MST.
- Page 4 Any button may be held down to step more quickly. If the RF Signal Detector is operating normally the LCD Screen will appear similar to Figure 1. Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.-Fri. Hours: 7 am to 6 pm MST.
- Page 5 Click on the “Market” tab and look at the “Spectrum and Market Area” to verify the exact frequency that your provider is operating on in your particular county or counties. Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com. Mon.-Fri. Hours: 7 am to 6 pm MST.
- Page 6 All products are engineered and assembled in the company’s 55,000-square-foot headquarters in St. George, Utah. Wilson Electronics has product dealers in all 50 states as well as in countries around the world.
- Page 7 Wilson Electronics. Wilson Electronics shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.
- Page 8 RF Signal Detector Specifications RF Signal Detector Specifications Model Number 2E7501 Antenna connector N-Type Antenna impedance 50 ohms Dimensions 5.7 x 4.2 x 1.5 inch (14.0 x 10.8 x 3.9 cm) Weight 1.24 lbs Maximum detectable in-band signal (dBm) Minimum detectable in-band signal with 1.5MHz BW (dBm)
Need help?
Do you have a question about the 2E7501 and is the answer not in the manual?
Questions and answers