Advertisement
Quick Links
Advertisement
Related Manuals for Alula CAM-DB-HS2-AI
Summary of Contents for Alula CAM-DB-HS2-AI
- Page 1 Quick Setup Get the Alula App Power Kit Installation Doorbell Installation Doorbell Setup...
- Page 2 Box Contents Mounting Plate (x2) Pick the one for best surveillance angle. Plate Foam (x1) Stabilize the mounting plate when installing it on the rough surface. Doorbell (x1) Power Kit (x1) Drill Bit (x1) Screwdriver (x1) Wire Connector (x4) Mounting Screw (x3) Security Screw (x1) Anchor (x3) Fixing Screw (x2)
- Page 3 1. Connect your mobile phone to Wi-Fi (suggested). Connect your mobile phone to Wi-Fi (suggested). 2. 2. Search for “Alula” in App Store or Google Play Search for “Alula” in App Store or Google Play 3. 3. Download and install the Alula app.
- Page 4 Coil of the door chime Power Kit Mechanical Chime / Electronic Chime Alula doorbell with no chime Alula doorbell with no chime If no chime is installed, skip power kit installation, install the doorbell, and connect the wires as shown in the figure below.
- Page 5 Power Kit Installation The power kit ensures that your doorbell gets the power it needs, so be sure to install it before you install your Doorbell. Shut off the electricity at the breaker that controls doorbell's Shut off the electricity at the breaker that controls doorbell's circuit.
- Page 6 Connect the wire harness to the chime's terminals named Connect the wire harness to the chime's terminals named TRANS and FRONT. TRANS and FRONT. Insert the existing chime wire and the other end of the wire Insert the existing chime wire and the other end of the wire harness into the wire connector and twist it tightly.
- Page 7 Doorbell Installation Recommended Installation Height: 1.2 m (4 ft) above the ground. Shut off the electricity at the breaker that controls doorbell's Shut off the electricity at the breaker that controls doorbell's circuit. circuit. (Optional) (Optional) When the wall is uneven, paste the plate foam to When the wall is uneven, paste the plate foam to the mounting plate.
- Page 8 If you have a chime installed, follow Option If not, follow Option Option A Connect doorbell with your existing doorbell wires. Connect doorbell with your existing doorbell wires. Fixing Screw U-Shaped Wire Power Supply: 12 to 24 VAC Option B Connect the fuse wire with your existing doorbell Connect the fuse wire with your existing doorbell wire.
- Page 9 Doorbell is powered on when its indicator flashes blue quickly. If not, make sure your electricity is off and check the wiring. If yes, proceed to doorbell setup. Doorbell Setup Add your doorbell to Alula app. 1. Remove the faceplate of the doorbell.
- Page 10 6. Put the faceplate back. Choose the corresponding chime type. 1. In the Alula app, tap the Chime Type in the Device Settings interface to go to the Chime Type interface. 2. Choose the chime type which you have installed in your...
- Page 11 Alula app before using it. Initialize Micro SD Card 1. In the Alula app, tap the Storage Settings in the Device Settings interface to check the micro SD card status. 2. If the card status displays as Uninitialized, tap to initialize 3.
- Page 12 4. If all the troubleshooting techniques listed above does not resolve the problem, please delete the device from your Alula account, reset and re-add.
- Page 13 DIRECT MONETARY NOT TO EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT. ALULA IS NOT LIABILE FOR ANY DAMAGE AS THE RESULT OF THE NEGLIGENCE OR WILLFUL MISCONDUCT OF DEALER, INSTALLER, USER OR ANY THIRD PARTY; B) PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: (i) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED;...
- Page 14 Scan the QR code with the Alula App to add the device to your account Please keep QR Code for further reference.
- Page 15 TO YOU FOR ANY INCIDENTAL, CONSQUENTIAL, PUNITIVE, INDIRECT OR SPECIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, BUSINESS INTERRUPTION, LOST PROFITS, LOSS OF USE, LOSS OF OPPORTUNITY OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF ALULA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
- Page 16 Regulatory Information FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)This device must accept any interference received, includinginterference that may cause undesired operation. Note: This product has been tested and found to comply with the limitsfor a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 17 BATTERY IS NOT USER REPLACEABLE. Due to the product shape and dimension, the name and address of the importer/manufacturer are printed on the package. Customer Service For more information, please visit alula.com. Need help? Please visit alula.com/contact for our local contact details.
Need help?
Do you have a question about the CAM-DB-HS2-AI and is the answer not in the manual?
Questions and answers