Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Würth BIOMATIC 2.0
- Page 1 BIOMATIC 2.0 mobile WASHER Art. No. 995.00004 Operating Manual...
- Page 2 BIOMATIC 2.0 MOBILE WASHER BIOMATIC 2.0 MOBILE WASHER INTRODUCTION Operating Manual Operating Manual INTRODUCTION Thank you for purchasing the Biomatic Parts Washer The Biomatic Parts Washer is designed to safely and effectively remove oil and grease from industrial and automotive parts. It employs a clever technology called bioremediation to dramatically reduce waste fluid generation, reducing the expense of hazardous waste removal and bringing significant savings to the user.
-
Page 3: Table Of Contents
BIOMATIC 2.0 MOBILE WASHER CONTENTS Operating Manual Safety Instructions Power Connection Proper Use Function Machine Diagram and Parts Setting Up Operation Energy Saving Mode Control Box Diagram – Normal Operation Maintenance and Care Shutting Down Restarting Moving or Transporting Maintenance and Repair... -
Page 4: Safety Instructions
BIOMATIC 2.0 MOBILE WASHER Operating Manual 1. SAFETY INSTRUCTIONS Every person who works with this machine must be familiar with the content of the operating instructions prior to use. These instructions are part of the unit and must be available to operating staff at all times. Please read the operating instructions for your Biomatic Parts Washer before using it. -
Page 5: Proper Use
BIOMATIC 2.0 MOBILE WASHER Operating Manual 3. PROPER USE The Biomatic Parts Washer is designed for manually cleaning parts with a maximum weight of 150kg. Do not exceed the specified weight. Biomatic Fluid and filter mat must be used for the Biomatic Parts Washer system to function properly. The use of other detergents or cleaning fluids can hamper or prevent the bioremediation of oil and greases and invalidate the warranty. -
Page 6: Machine Diagram And Parts
BIOMATIC 2.0 MOBILE WASHER Operating Manual 5. MACHINE DIAGRAM AND PARTS Sink Assembly Part No.: Standard 995.900049 | XL 995.900050 Nozzle kit Part No. 995.900054 Straight Flow Brush & Hose Part No. 995.900002 Filter Support Grid Part No. 995.900055 Filter mat Part No. -
Page 7: Setting Up
BIOMATIC 2.0 MOBILE WASHER Operating Manual 6. SETTING UP After removing packaging, check the unit for transport damage. If any defect is detected do not connect the machine to the mains. Report damage to vendor. Situate the Biomatic Parts Washer on flat stable ground. The floor must be even to ensure safe operation. -
Page 8: Energy Saving Mode
BIOMATIC 2.0 MOBILE WASHER Operating Manual 8. ENERGY SAVING MODE After a 4 hour period of inactivity the Biomatic Parts Washer automatically switches to energy saving mode (37°c) and remains at this temperature until the pump is restarted when it will return to 42°C. -
Page 9: Maintenance And Care
BIOMATIC 2.0 MOBILE WASHER Operating Manual 10. MAINTENANCE AND CARE DAILY Check to see if the red “LOW FLUID” indicator light is flashing. If the red “LOW FLUID” light is flashing, pour 20 litres of Biomatic Fluid into the Biomatic Parts Washer sink. -
Page 10: Shutting Down
BIOMATIC 2.0 MOBILE WASHER Operating Manual 11. SHUTTING DOWN Switch the power off at the electrical socket. NOTE – In order for the bioremediation process to occur the temperature of the cleaning solution must be maintained at 42°C for the microbes to operate at their optimal level. Therefore the Biomatic Parts Washer must remain plugged in at all times. -
Page 11: Troubleshooting Guide
BIOMATIC 2.0 MOBILE WASHER Operating Manual 15. TROUBLESHOOTING GUIDE Output Description Notes LED 1 LED 2 Sound Problem Indicators Solution a) Check fluid level. Green Flashing Solid Liquid level is too low. Application stopped, heater Beep b) Check level sensor position. -
Page 12: Accessories And Spare Parts
BIOMATIC 2.0 MOBILE WASHER Operating Manual 16. ACCESSORIES AND SPARE PARTS Only use accessories and spare parts which have been approved by Wurth Canada Ltd. This ensures that the Biomatic Parts Washer operates correctly and safely. 17. WARRANTY Wurth Canada warrants these products for one (1) year against deficiencies in material and workmanship. -
Page 13: Ce Declaration
BIOMATIC 2.0 MOBILE WASHER Operating Manual 20. CE DECLARATION We hereby declare that the machines stated below comply with the relevant basic health and safety requirements of the EU Directive, both in their basic design and construction and in the version put into circulation by us. -
Page 14: Electrical Box Diagram
BIOMATIC 2.0 MOBILE WASHER Operating Manual 21. ELECTRICAL BOX DIAGRAM | Pg 11... - Page 15 BIOMATIC PARTS WASHER Art. No. 995.00004 Operating Manual 2021 Printed in Canada. All rights reserved. May not be Würth Canada Limited reproduced, in part or in whole, without prior consent. 345 Hanlon Creek Boulevard Copyright © 2021 Würth Canada Limited/Limitée. All Rights Reserved. Guelph, Ontario, Canada Please note that while Würth Canada has made diligent efforts to illustrate N1C 0A1...
Need help?
Do you have a question about the BIOMATIC 2.0 and is the answer not in the manual?
Questions and answers