Edge Wireless PRC-1 Manual

Smartphone remote control

Advertisement

Smartphone Remote Control Manul

Pairing Instructions

Press any button on the remote to wake it up. Open the bluetooth setting menu in the device you wish to
pair to. Toggle your devices bluetooth to on if it is not already. Ensure your decive is in searching mode
and is looking for devices to pair to. In the available devices menu, look for PRC-1 and select it. Once
your device finds the remote, it will ask if you would like to pair with the remote. Select Pair and exit the
settings menu. If pairing was successful, you will see blue LED stays on for 1 second.

LEDs

Red LED: The red LED stays solid when battery is in charging.
Green LED: Once the remotes battery has depleted below 3.0V, the Green LED will come onsolid and
remain on at all times.
Blue LED: Press and hold power button to enter pairing mode, the Blue LED flashes waiting to be paired.

Remote Wake Up/Sleep

After 20 minutes, if no buttons are used, the remote will automatically go into sleep to preserve battery
life. To wake it back up, simply press any button on the remote once.
Design Features And Functions
PREVIOUS TRACK
Push once
VOLUME DOWN
Push once
7TH BUILDING, NO.59 CHUANG FU ROAD,XIAO GANG
INDUSTRIAL ZONE, NINGBO 315800, CHINA
Tel +86.574.873.88888
Pair with Bluetooth Device
Push and Hold
PLAY/PAUSE
Push once
Fax +86.574.876.77777
NEXT TRACK
Push once
VOLUME UP
Push once
www.edgeholdings.com
PRC-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRC-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Edge Wireless PRC-1

  • Page 1 Toggle your devices bluetooth to on if it is not already. Ensure your decive is in searching mode and is looking for devices to pair to. In the available devices menu, look for PRC-1 and select it. Once your device finds the remote, it will ask if you would like to pair with the remote.
  • Page 2 Smartphone Remote Control Manul PRC-1 Battery Charging Open the cover at back of the unit, you will see the micro USB charging port. Plug in any micro USB cable to charge the battery, the red LED stays on. When it is fully charged, the red LED stays off.

Table of Contents