Cameron AMZ30DB Quick Start Manual

Model AMZ30DB
Made in China. Distributed by Atoms Labs LLC
©2020 Atoms Labs LLC, Flower Mound, TX. All rights reserved. App Store logo is a registered trademark of Apple, Inc.
Google Play logo is a registered trademark of Google, Inc. Amazon Appstore logo is a registered trademark of Amazon.
Certain other product names, brand names, and company names may be trademarks or designations of their respective owners.
FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is subjected to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FO LD

Getting Started

x2 Mounting Brackets
Video Doorbell
camera
Screws and
Quick Start Guide
Anchor Kit

What You Will Need:

Philips Screwdriver, access to circuit breaker, 2.4GHz Wi-Fi network, network name and password.
Hmmm...which kind of doorbell do I have?

Identify which kind of doorbell you have?

Mechanical
Standard
Mechanical Doorbell
(Ding Dong Sound)
Existing
Doorbell
1
Turn off power to your doorbell
at your circuit box.
SUPER IMPORTANT!
ON
OFF

In the Box

Mounting Template Wiring Kit
Digital Adapter and Sticker 16GB MicroSD Card
(For use when replacing a (Pre-installed)
digital chime doorbell)
Digital*
(musical chime)
The Digital Adapter is required
for use with a Digital Doorbell.
Use with a mechanical chime if
the mechanical chime develops
Digital a "hum". The sticker can be used
Adapter
to attach adapter to the chime.
Front Trans Rear
NOTE: If you have a digital Doorbell and it has
Transformer
(load box) a diode installed on on the actual doorbell
button, do not use the diode when replacing
the doorbell with your new Video Doorbell.
2
Grab a screwdriver and remove
your existing doorbell button.
(not included)