Sony DSC-H1 Operating Instructions page 2

5 Shoot images easily (Auto adjustment mode)
5
1
Holding the camera Holding the camera
Select a mode.
Still image (auto adjustment mode):
Select
Movie:
Select
Position the subject in the center of the focus Position the subject in the center of the focus
frame. frame.
Control button
Using the control button
VGA
96
Using the flash for
still images
S AF
Checking the last
VGA VGA
8 / 8 96
Shooting close-up
Review
image you shot
(Macro)
(Quick Review)
101-0029 2005 1 1 10:30
PM
S AF
RETURN
Using the
VGA
96
self-timer
S AF
Checking the last still image you shot (Quick Review)
Press b (
) on the control button.
To cancel, press b again.
• The image may appear rough right after playback starts.
(Delete) and select [Delete] with v on the control button, then press z.
• To delete the image, press
Selecting a flash mode for still images
Before step 2, press
v
( ) on the control button repeatedly until the desired mode is selected.
No indicator Strobes if it is dark or against light (default setting)
Forced flash
Slow synchro (Forced flash)
SL
The shutter speed is slow in a dark place to clearly shoot the background
that is out of flash light.
No flash
• The flash automatically pops up and strobes. Close the flash by hand after use.
• When the adaptor ring (supplied) or the lens hood (supplied) is attached, the flashlight is blocked.
• Shooting distance (when [ISO] is set to [Auto])
W side: Approx. 0.3 to 6.8 m (11 26/32 inches to 22 feet 3 23/32 inches)
T side: Approx. 0.9 to 5.2 m (2 feet 11 14/32 inches to 17 feet 23/32 inches)
• The flash strobes twice. The first time is to adjust the light quantity.
Shooting close-up (Macro)
Before step 2, press
B
( ) on the control button.
To cancel, press B again.
• Setting the zoom all the way to the W side is recommended.
• The in-focus range becomes narrow, and the complete subject may not entirely be in focus.
• The AF speed drops.
Shortest shooting distance from the lens surface
Setting all the way to the W side: Approx. 2 cm (13/16 inches)
Setting all the way to the T side: Approx. 90 cm (35 1/2 inches)
Using the self-timer
Before step 2, press V
( ) on the control button.
Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates
(approximately 10 seconds later).
Self-timer lamp
2
Shoot with the shutter button.
Still image:
Press and hold AE/AF lock indicator
halfway down to Flashing t lit/beeps
.
focus
FINE
VGA
96
.
30 F2.8
S AF
AF range finder frame
Movie:
Press fully down
STD
6 4 0
REC 00:00:02[00:10:48]
Zoom button
To stop recording, press the shutter button fully down again.
Using the zoom
Zoom button
VGA VGA
T 96 T 96
W W
1.1 25
S AF S AF
Pressing the button slightly zooms slowly and pressing the button fully down zooms fast.
• When the zoom scale exceeds 12×, the camera uses [Digital Zoom].
For details on the [Digital Zoom] settings and the image quality t "User's Guide/Troubleshooting" (page
51)
• You cannot change the zoom scale while shooting a movie.
If you shoot a still image of a subject that is difficult to focus on
• If the subject is closer than approx. 50 cm (19 3/4 inches) at W-side position, use the Macro mode (left
column).
• When the camera cannot focus on the subject automatically, the AE/AF lock indicator changes to flashing
slowly and the beep does not sound (except for Continuous AF, t "User's Guide/Troubleshooting" (page
51)). Recompose the shot and focus again.
Subjects difficult to focus on are:
– Distant from the camera and dark – Reflect light or have a lustrous finish
– The contrast between the subject and its – Flashing
background is poor.
– Against light
– Seen through glass
– Moving fast
Anti-blur function
The anti-blur function is equipped with the camera.
To cancel the anti-blur function, set the mode dial to other than
(STEADY SHOT) button to display the indicator. To turn on the anti-blur function, press the
(STEADY SHOT) button again.
(STEADY SHOT) button
• When the mode dial is set to , you cannot cancel the anti-blur function.
• You can save the battery power when the anti-blur function is deactivated.
• You can change the anti-blur mode t "User's Guide/Troubleshooting" (page 54).
To identify items on the screen
t "User's Guide/Troubleshooting" (page 18)
To shoot using the finder
With the FINDER/LCD button, you can choose to shoot either using the finder or the LCD
screen. When you use the finder, the image does not appear on the LCD screen. Adjust the finder
adjustment lever until the image appears clearly within the finder, then shoot the image.
Finder adjustment lever
FINDER/LCD button
Shoot still images (Scene Selection)
1
Select the desired mode of Scene
Selection (
).
Press fully down
The shutter sounds.
• For details on modes, see below.
2
Shoot with the shutter button.
To cancel the Scene Selection
Set the mode dial to other than the mode of Scene Selection.
Scene Selection modes
The following modes are predetermined to match the scene conditions.
Twilight*
Shoots night scenes at a distance
without losing the dark
atmosphere of the surroundings.
Twilight portrait*
Shoots portraits in dark places.
Candle*
, then press the
Shoot candlelit scenes, without
spoiling the atmosphere.
Beach
Shoots seasides or lakesides, the
blue of the water clearly recorded.
* The shutter speed becomes slower, so using a tripod is recommended.
To use the functions set by the control button with Scene Selection
Before shooting in step 2, select the settings with the control button. Some functions are not
available, depending on the Scene Selection mode. When you press the button to select functions
that cannot be combined with Scene Selection, a beep sounds. t "User's Guide/
Troubleshooting" (page 28)
View/delete images
6
6
1
Select
, , , , , ,
/ button
button
To delete images
1 Display the image you want to delete and press
2 Select [Delete] with v, then press z.
To view an enlarged image (playback zoom)
While displaying a still image, press
To undo the zoom, press
High-speed shutter
Adjust the portion: v/V/b/B
Cancel playback zoom: z
Shoots moving subjects in bright
places.
To store enlarged images: [Trimming] t "User's Guide/Troubleshooting" (page 49)
Viewing an index screen
Landscape
(index), then select an image with v/V/b/B.
Press
Shoots landscapes, etc., by
To return to the single-image screen, press z. To display the next (previous) index screen, press
focusing on a distant subject.
b/B.
Portrait
Shoots with backgrounds blur
•
away, and the subject is SINGLE DISPLAY
If you press again, the sixteen-image
sharpened.
index screen appears.
To delete images in index mode
1 While an index screen is displayed, press
control button, then press z.
2 Select the image you want to delete with v/V/b/B, then press z to display the
indicator on the selected image.
SELECT
3 Press (Delete).
4 Select [OK] with B, then press z.
• To delete all the images in the folder, select [All In This Folder] with v/V in step 1 instead of [Select], then
press z.
2
Select an image with b/B.
.
VGA
3 9
/
101-0003 2005 1 1 10:30
PM
BACK/NEXT VOLUME
Still image: the image size is displayed
Movie: is displayed
• You can easily view the next/previous image by turning
Jog dial
the jog dial.
Movie:
To play back a movie, press z.
STD
6 4 0 B
10/10
00:00:03
Playback bar
101_0010 2005 1 1 10:30
PM
STOP REV/CUE VOLUME
button
Rewind/Fast forward: b/B
Control button (Return to normal playback: z)
Volume: v/V
Stop playback: z
• Movies with the image size [160] are displayed a size
smaller.
(delete).
VGA
2 / 9
To cancel the deletion
Select [Exit], then press z.
Delete
Exit
BACK/NEXT
to zoom in on the image.
.
VGA
3 9
/
101-0003 2005 1 1 10:30
• PM
SINGLE DISPLAY BACK/NEXT VOLUME
(Delete) and select [Select] with v/V on the
(Delete)
To cancel a selection
Select an image you have previously selected for deletion, then
press z to delete the
indicator from the image.
TO NEXT