Autofocus Area - Sony NEX-3 Handbook

Autofocus Area

Selects the focusing area. Use this function when it is difficult to get the proper focus in
auto focus mode.
1 [Menu] t [Camera] t [Autofocus Area] t desired mode.
(Multi)
(Center)
(Flexible
Spot)
Notes
• When this function is set to other than [Multi], you cannot use the [Face Detection] function.
• [Multi] is selected when using the following functions:
– Movie recording
– [Intelligent Auto]
– [Scene Selection]
– [Anti Motion Blur]
– [Sweep Panorama]
– [Smile Shutter]
The camera determines which of the 25
AF areas is used for focusing.
When you press the shutter button
halfway down in still image shooting
mode, a green frame is displayed around
the area that is in focus.
• When the Face Detection function is
active, AF operates with priority on
faces.
The camera uses the AF area located in
the center area exclusively.
Moves the focusing area to focus on a
small subject or narrow area by pressing
the top/bottom/right/left of the control
wheel.
AF range finder frame
AF range finder frame
AF range finder frame
GB
55