Download Print this page
Mania ERALIA Instructions

Mania ERALIA Instructions

Cordless vacuum cleaner

Advertisement

Quick Links

INSTRUCTIONS
ERALIA CORDLESS VACUUM
CLEANER
PACKAGE CONTENTS
Vacuum cleaner
5 × attachment
USB charging cable
User manual
TECHNICAL SPECIFICATIONS
Rated voltage: 7.4 V DC 5 A
Rated power: 37 W
Battery capacity: 2200 mAh
COMPONENTS
1. ON/OFF switch
2. Charging port
3. Dust collector removal button
4. Air filter
5. Dust collector
6. Brush attachment
7. Long attachment
8. Hose attachment
9. Hose adapter 1
10. Hose adapter 2
CHARGING
Plug the USB part of the charging cable into
a phone charger or into any USB port on your
computer or in your car. Plug the other end
into the charging port on the back of the
vacuum (2).
The device starts charging by itself.
You should charge the device for 3–4 hours
for a full charge.
Unplug the device from the charging cable
after the battery is full.
HOW TO USE
Use the ON/OFF switch to turn the vacuum
ON or OFF.
Connect the attachments to the front of the
vacuum. There is an opening on the front of
the dust collector – that's where the
attachments go.
To connect the hose first connect the hose
adapters 1 and 2 to the hose. The hose
adapter 2 goes into the vacuum and the
hose adapter 1 goes on the front of the hose.
Attach attachments to the hose adapter 1.
MAINTENANCE
Remove the dust collector by pressing the
button (3) on top of the vacuum.
Remove the air filter from the dust collector
and empty the contents of the collector into
the trash.

Advertisement

loading
Need help?

Need help?

Do you have a question about the ERALIA and is the answer not in the manual?

Questions and answers

Summary of Contents for Mania ERALIA

  • Page 1 Plug the USB part of the charging cable into a phone charger or into any USB port on your ERALIA CORDLESS VACUUM computer or in your car. Plug the other end into the charging port on the back of the CLEANER vacuum (2).
  • Page 2 • Clean the air filter and dust collector with WEEE disposal recycling symbol. The WEEE symbol is clean running water and wipe with a clean attached product dry cloth. compliance with the EU directive • Put the dust filter back into the dust 2012/19/EU on Waste Electrical collector and attach the dust collector to the and Electronic Equipment (WEEE).