Enabling Devices Plasma Star with Mounting Arm User Manual

9. Activating your switch will make the Plasma Star display an amazing Plasma
Light show for as long as the switch is activated. Once the switch is released the
Plasma Light will stop The Pocket Plasma will also work without the use of a
switch, by setting the ON/SOUND RESPONSE/OFF switch to SOUND
RESPONSE. In this setting any nearby sound, voice, vocalization or music will
activate the Plasma Light.
10. When you are finished using the Plasma Star turn the ON/SOUND
RESPONSE/OFF switch to OFF, this will help conserve battery power. Leaving it
ON or set to SOUND RESPONSE will drain the batteries out completely in a
short amount of time.

Troubleshooting:

Problem: The Plasma Star does not work when my switch is activated.
Action #1: Make sure that you press all connections firmly together. Any gaps may
interrupt electrical connection. The ON/SOUND RESPONSE/OFF switch needs to
be set to SOUND RESPONSE.
Action #2: Make sure batteries are fresh.
Action #3: Try a different switch with the Plasma Star to rule it out as the source of
the problem.
Problem: The Plasma Star works intermittently.
Action: Replace batteries in the Plasma Star.

Care of Unit:

The Plasma Star can be wiped clean with any mild household multi-purpose, non-
abrasive cleaner and disinfectant. We recommend Simple Green, which is a non toxic
biodegradable all-purpose cleaner.
Do not submerge the unit in any fluids, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners, as they will scratch the surface of the unit.
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-TEC-TOYS or 1-800-832-8697
customer_support@enablingdevices.com
Plasma Star with Mounting Arm - #7512 &
Mountable Plasma Star- #7512M
USER'S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com