Download Print this page
Homelegance 5686-32 Assembly Instruction

Homelegance 5686-32 Assembly Instruction

3pcs pack counter height set

Advertisement

Quick Links

ASSEMBLY INSTRUCTION / INSTRUCTION D'ASSEMBLAGE
Thank you for purchasing this product. Please take time to read and follow the instructions below.Check that you have all parts
and hardware before assembly. Parts apparently missing are often found in the packing materials.If you do not have all the
parts listed, have your dealer contact us and they will be sent to you immediately.
Merci d'avoir acheté ce produit. Veuillez lire et suivre les instructions ci-dessous.Vérifiez avant le montage que vous
avez toutes les pièces et fixations.Les pièces qui semblent manquer se trouvent souvent dans les matériaux d'emballage
Si vous n'avez pas toutes les pièces de la liste, demandez à votre détaillant et nous vous les enverrons immédiatement.
It is recommended to install protective pads under all legs and supports to avoid damage or scratches when placing
furniture on a wood floor or other hard surface, and to limit indentation and prevent discoloration if placing on carpet.
II est recommandé de placer des coussins protecteurs sous tous les pieds et toutes les bases des meubles pour
éviter d'endommager ou d'égratigner les planchers en bois ou autres surfaces dures, et pour limiter I'empreinte et
empêcher la décoloration quand les meubles reposent sur la moquette.
PARTS LIST
NO:
DESCRIPTION
1
Table top / Dessus de table
2
Table leg / Pied de table
3
Metal cross bar
5686-32 (TABLE)
1PC
2PCS
2PCS
2
1
HARDWARE LIST
LISTE DE QUINCAILLERIE
NO:
DESCRIPTION
Bolt / Boulon
A
Screw / Vis
B
Spring washer / rondelle d'arrêt
C
Flat washer / Rondelle plate
D
Allen key / Clè allen
E
*HARDWARE SET ARE PACKED IN 5686 FOR ASSEMBLY
2
SIZE
8PCS
Ø3.5 x 15mm
8PCS
Ø8 x 13mm
8PCS
Ø8 x 19mm
8PCS
Ø4 x 59mm
E
A
C
D
PAGE: 1 OF 4
1PC

Advertisement

loading

Summary of Contents for Homelegance 5686-32

  • Page 1 ASSEMBLY INSTRUCTION / INSTRUCTION D'ASSEMBLAGE 5686-32 (TABLE) Thank you for purchasing this product. Please take time to read and follow the instructions below.Check that you have all parts and hardware before assembly. Parts apparently missing are often found in the packing materials.If you do not have all the parts listed, have your dealer contact us and they will be sent to you immediately.
  • Page 2 Step 2 / Étape 2 Align and attach the metal cross bar to the pre-drilled holes, insert screws to tighten it. Rotate left or right center cross bar hook to adjust the length to be level and balance as needed. Assembly Completed / Assemblage Completé...
  • Page 3 ASSEMBLY INSTRUCTION / INSTRUCTION D'ASSEMBLAGE 5686-32 (CHAIR) Thank you for purchasing this product. Please take time to read and follow the instructions below.Check that you have all parts and hardware before assembly. Parts apparently missing are often found in the packing materials.If you do not have all the parts listed, have your dealer contact us and they will be sent to you immediately.
  • Page 4 Step 2 / Étape 2 Step 3 / Étape 3 NOT PROVIDED Assembly Completed / Assemblage Completé PAGE: 4 OF 4 MADE IN VIETNAM / FABRIQUÉ AU VIETNAM DO NOT TIGHTEN BOLTS UNTIL COMPLETELY ASSEMBLED NE PAS SERRER LES BOULONS JUSQU'À CE QUE LE MONTAGE SOIT COMPLETMENT TERMINE...