Tripp Lite DWM1737MA Owner's Manual page 4

1. Separate VESA Plate from Wall Mount
loosen
remove
2a. Mount on Wood Stud Wall
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
13-08-141-933296.indb 4
D6 Washer
Anchor Bolt
WARNING
4
Find and mark the
exact location of
mounting holes
With the up arrow of the
template pointing upward
1
2
3
Drill pilot holes
Screw the wall
plate onto the
wall
8/15/2013 2:09:21 PM