ViewSonic N3235w-2M Service Manual page 27

(5) Open V-Chip (only enabled in DTV source)
1. Press ▲ or ▼ to select "Open V-Chip", then press
ENTER or ►.
2. Press ENTER or ► again on "U.S. (50 states +
possessions)", then press ENTER or ►.
3. Press ▲ or ▼ to select the blocking item, then press
ENTER or ►.
4. Press ENTER to set or reset the rating.
5. Press MENU to exit.
(6) Block Unrated
1. Press ▲ or ▼ to select "Block Unrated", then press
◄ or ► to select "On" or "Off". When "On" is selected,
all programs that are not rated will be blocked.
2. Press MENU to exit.
Input Block:
1. Press ▲ or ▼ to select "Input Block", then press ▲ or
▼ to select the input source from which you want to
block.
2. Press ENTER to block or unblock the input source.
3. Press MENU to exit.
ViewSonic Corporation
24
Confidential - Do Not Copy
N3235w-2M