Moultrie Feeder Feet Gen2 Instructions

A
INSTALLING ON 1.5" SQUARE TUBE LEGS
Remove pin from feeder feet assembly.
Insert pin through hole of leg and adapter.
Repeat for all three feeder feet.
WARNING:
MOULTRIE_Feeder Feet Gen2 Manual-ENGLISH_8-13-20.indd 1 MOULTRIE_Feeder Feet Gen2 Manual-ENGLISH_8-13-20.indd 1
Instructions for Feeder Feet Gen2
THANK YOU for your purchase of the Feeder Feet Gen2. Please read this sheet before
operating the unit. If you should have any questions about this product or any other
Moultrie product, please contact us using the information on the back of this sheet.
To help us to better serve you and to activate your Lifetime Warranty, please submit
your warranty information online at http://www.moultriefeeders.com/warranty
Do not use feeder feet on hard/slick ground or surfaces without stakes.
Slide whole assembly into 1.5" Square tube feeder leg.
Insert Stake through foot into the ground to the desired depth.
8/17/20 8:32 AM 8/17/20 8:32 AM