Related Manuals for Helite SDU
Summary of Contents for Helite SDU
- Page 1 OPTION FULL PROTECTION USER GUIDE / SDU FORK SENSOR Helite www.helite.com helite@helite.com Distribué par Helite Certified airbag 1, rue de la petite fin 21121 Fontaine-Lès-Dijon...
- Page 3 User Guide y It is possible to pair as many vests as you like with one fork sensor. y Rider and pillion rider can use the same fork sensor. To check if your vest has recognized the fork sensor, you just need to place the magnet on the fork sensor.
- Page 4 0 km/h on (e.g. impact when stopped by a third party vehicle). Additionally, the detection time is divided by 2. Please note that each accident is different. Even though the Helite crash detection system covers a large majority of potential accidents, there is always a non-zero risk of non- triggering, especially in the following situations: - Lack of GPS signal (tunnel, underground parking, etc.)
- Page 5 Please note that this check should be done in an environment of more than 10°C. - the SDU fork sensor should only be used in a temperature range of -10 to + 45°C. Prolonged exposure of the system to temperatures below -10°C and above 45°C may...
- Page 6 - You can leave the sensor on your motorcycle all year round. - The SDU fork sensor is waterproof and resistant to different temperatures. - Do not throw the fork sensor in your bin. Bring it to a dump or bring it to your dealer.
- Page 7 - the activated (switched on) vest does not show any reaction when you place the magnet over the sensor. - the SDU fork sensor flashes red when you place the magnet over the round sign during the first 5 years of purchase.
- Page 8 @HeliteOfficial N° SDUM0720201...
Need help?
Do you have a question about the SDU and is the answer not in the manual?
Questions and answers